illustrate

H11L1 (UL Listed) and H11L1V (UL and VDE Approved) each device consists of GaAs infrared; integrated microprocessor compatible Schmitt trigger with high-speed output optically coupled light-emitting diodes; detector, provides noise immunity hysteresis and pulse shaping.

feature

High data rate, typical 1MHz (NRZ)

Latch up and oscillation free

Microprocessor Compatible Driver

Logic Compatible Output Receiver 16mA

0.4V max

Guaranteed on/off threshold hysteresis wide supply voltage capability, compatible with all popular logic systems

Operating voltage range

VCC 3V to 16V

Operating temperature range -55°C to +100°C

High AC isolation voltage 5000VRMS

Lead-free and RoHS compliant

UL certificate E91231

VDE approval certificate 40044376

application

Logic to Logic Isolator Line Receiver - Eliminates Noise and Transient Issues

Programmable Current Level Sensor

AC to TTL Conversion - Square Wave Shaping

Power digital programming

computer peripheral interface

Add G after PN with 10 mm lead spacing Add SM after surface mount PN Add SMT&R tape and reel after surface mount PN

absolute maximum ratio

Causes of stress beyond the absolute maximum ratio Permanent damage to the device. Exposure to the absolute maximum ratio for extended periods of time can adversely affect reliability

Electrical Characteristics (TA=25°C unless otherwise specified. Typical values at TA=25°C)

Recommended pad laying for SMD (mm)

Tape and Reel Packaging

Electrical Characteristics (TA=25°C, unless otherwise specified, typical at TA=25°C)

Note 1: When measuring, the input leads are shorted together, and the output leads are shorted together.

Switching time test circuit and waveform

Infrared reflow soldering temperature curve (one reflow soldering is recommended)

notes:

-Isocom is constantly improving quality, reliability, functionality or design and Isocom reserves the right to make changes without notice.

- The products shown in this publication are intended for electronic applications such as office automation equipment, communication equipment, audio-visual equipment, electrical applications and instruments.

-For equipment/applications that require high reliability or safety, such as space applications, nuclear power control equipment, medical equipment, etc., please contact our sales representative.

- When a device for any "specific" app is required, please contact our sales for advice.

- The content described here is subject to change without notice.

- Do not immerse the device body in solder paste.

ISOCOM constantly strives to improve the quality and reliability of its products. However, semiconductor devices often fail or fail due to their inherent susceptibility to electrical and physical stress. It is the buyer's responsibility to comply with the safety standards of the entire system design when using ISOCOM products, and to avoid situations where the ISOCOM product may cause personal injury or property damage. When developing your design, make sure to use the operating ranges specified in the latest ISOCOM product specification for ISOCOM products within the specified ranges.

The ISOCOM products listed in this document are generally used in electronic applications (computers, personal equipment, office equipment, measuring equipment, industrial robots, household appliances, etc.). These ISOCOM products are neither intended nor warranted for use in equipment requiring the highest quality and/or reliability, malfunction or failure may result in personal injury or death ("accidental use"). Unintended uses include atomic energy control instruments, aircraft or spacecraft instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical equipment, various safety devices, etc. . Unintended use of ISOCOM products listed in this document shall be at the customer's own risk. __Gallium Arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or shred products, or use chemicals to dissolve them. When disposing of the product, please observe the appropriate regulations. Do not dispose of the product with other industrial waste or household waste. The products described in this document are subject to foreign exchange and foreign exchange trade laws. The information contained in this document is intended only as our application guide product. ISOCOM components are not responsible for any violation of intellectual property or other rights that may arise from third-party use. No license is granted by implication or otherwise to ISOCOM components or otherwise.