High Density Wide Range Input and Output Adjustment Capability Remote On/Off Fixed Switching Frequency International Safety Certification Key Market Segment Applications & Telecom Custom Power Supply Point of Load PH Features and Benefits Features High Density Components Small Count Fixed Operating Frequency Multiple Input Voltages BENEFIT Smaller Package size Proof of high reliability 5,000,000 hours MTBF Simpler system filtration system can work from different input voltages 3.3V term input range output voltage ADJ. Range Line Regulation Load Regulation Ripple and Noise Series Operation Over Voltage Protection Overload Protection Remote On/Off Remote Sensing Parallel Operation Inverter Good Signal Thermal Protection Cooling Operating Temperature Range Storage Temperature COEF Network cient Isolation Insulation Resistance Safety Certification Guarantee -----------------5V12V15V24V28V48V24V: 18-36, 48V: 36-76V, 110V: 82-185V, 280V: 200-400V2.97~3.63 4.5~ 5.5 10.8~13.2 13.5~16.5 21.6~26.4 25.2~30.8 43.2~52.80.4 % or 20mV (whichever is higher) with a constant load over the entire input range within 0.8% or 40mV (whichever is higher) prevail), from no-load to full-load constant input line 100mV150mV240mV280mV480mV possible - see installation manual 150-180%125-145% about 105-140%, auto-recovery low=ON, open=OFFPH100S, PH150S, PH300S, PH600S models PH300S & only PH600S: External circuit is required PH300S & only PH600S: The signal can be used for the internal detection of the inverter status, self-reset conduction or forced air cooling. Please refer to the cooling and heat sink selection application note for baseplate temperatures -20°C to +85°C (100°C for PH300 & PH600). -40°C start-up possible with 30 minute warm-up period -40°C to +85°C (+100°C for PH300 & PH600) 0.02%/°C Input to Output: 3000VAC, Input to Baseplate: 2500VAC (1 ) Output base - 100MOhm at 500VDC and 70% RHUL1950, CSA234, EN60950 and CE marked. two years