-
2022-09-24 17:55:53
STM32F103VET6-Chinese information, data manual, PDF information, original spot fake one loses ten, price consultation-Xuanshengda Electronics
STM32F103VET6 brand ST, package LQFP100 original spot
STM32F103VET6 parameters: 100 pins, 512KFlash 64kSRAM LQFP package 32-bit Cortex core
STM32F103VET6 Function: For LQFP100 and BGA100 packages, only FSMC Bank1 and Bank2 are available. Bank1 can only use the NE1 chip to select NOR/PSRAM memory that supports multiplexing. Bank2 can only use NCE2 chip to choose to support 16 or 8 bit NAND flash. Since Port G is not available in this package, interrupt lines cannot be used.
Timers: 4 general timers, two advanced timers, two basic timers.
Communication mode: two SPI, two I2C, five USART, one USB, one CAN communication, one SDIO
GPIO: 80
ADC: 12-bit ADC with three channels totaling 16 channels
DAC: 12-bit DAC with 2 channels in total
CPU: 72MHz
Operating voltage: 2.0-3.6V
Maximum power dissipation: 434mW
3. Function overview:
4. Electrical characteristics:
Special attention points: the sum of all currents flowing into VDD is less than 150mA, and the current flowing out is also
The output sink current is below 25mA.
The sum of injection currents is less than 25mA (sum of positive and negative injection currents).