Acting as TI Texas Instruments distributor

General Description The AD7865 is a fast, low-power, quad-channel synchronous

Sampling 14-bit A/D converter that runs from a single 5v AD7865BSZ-1 analog-to-digital converter

supply. part contains a 2.4µs successive approximation analog-to-digital converter AD7865BSZ-1

ADC, 4-way/hold amplifier, 2.5 V reference, on-chip clock

oscillators, signal conditioning circuits and high-speed parallel interfaces. Simul-sample the input signal on four channels

There are four analog inputs on the relative phase information signal. This part accepts an analog input analog-to-digital converter AD7865BSZ-1

Ranges are ±10v, ±5v, ±2.5 V, 0 V to 2.5 V, 0 V to 5v. This section allows converting any subset of the four channels

in order to maximize the throughput of the selected sequence. The channel to be converted can be hard-selected

Software (channel select input pin) or via software (programming) AD7865BSZ-1 analog-to-digital converter

channel selection register). A single conversion start signal (CONVST) is in place simultaneously

All tracks/cargo compartments go into the cargo compartment and start the conversion sequence AD7865BSZ-1

for the selected channel. The EOC signal indicates the end of each individual transition in the selected transition sequence.

A busy signal indicates the end of a conversion sequence. Use standard CS and RD signals. single maximum throughput

The channel is 350 GHz. For all four channels, the maximum pass-

put is equal to 100ksps. Analog to Digital Converter AD7865BSZ-1

The AD7865 is available in a small (0.3 sq. inch area) 44-lead PQFP.

Product Highlights 1. The AD7865 features four track/hold amplifiers and a fast

(2.4µs) ADCs allow simultaneous sampling and then common versions of any subset of the four channels.

2. The AD7865 operates from a single 5V supply and con-

The sume only has a typ of 115 mW, which makes it ideal for low power consumption and low power consumption

Portable application. 3. This part provides a high-speed parallel interface for easy control

Associated with microprocessors, microcontrollers and digital signal processors.

4. The part is available in three different analog versions

Enter the range. AD7865-1 provides standard industrial ±10v and ±5v ranges; AD7865-2 provides unipolar

range from 0 V to 2.5 V or 0 V to 5 V and the AD7865-3 provides

A common signal processing input range is ±2.5 V. 5. The part has very tight aperture delay matching between

Four input sample and hold amplifiers.

Shenzhen Tianzhuo Weiye Electronics Co., Ltd.

In the past 10 years, Shenzhen Tianzhuo Weiye Electronics Co., Ltd. has seized the historical opportunities brought by China's reform and opening up and the rapid development of the electronics industry, adhered to customer-centricity and high-quality products as the foundation, and provided customers with one-stop procurement services for components. Won the respect and trust of customers, from an entrepreneurial company based in Huaqiangbei, Shenzhen Special Economic Zone, China, it has grown steadily into an electronic component supplier with several well-known brand product lines and customers in many countries and regions around the world. The electronic IC and 3C distributed and wholesaled sell well in the consumer market and enjoy a high status among consumers. The company has established long-term and stable cooperative relations with many retailers and agents.