Acting as TI Texas Instruments distributor

MAX13410E-MAX13415E are half-duplex RS-485-/RS-interfaces MAX13412EESA+T

422 compatible transceiver optimized for isolated applications. Interface MAX13412EESA+T These devices feature an internal low dropout regulator (LDO), a driver and a receiver. Inter - nal LDO allows the part from unregulated operation

Power supply up to 28V. AutoDirection feature reduces the number of optical isolators required in isolat-

application. Other features include enhanced ESD protection, fail-safe circuitry, slew rate limiting, and a fully interfaced MAX13412EESA+T

operating speed. The MAX13410E-MAX13415E internal LDO generates a

Interface MAX13412EESA+T5V±10% power supply for internal power supply circuit. MAX13412E-MAX13415E bring 5V to an

Allows the user to additionally power the output VREG to external circuits with up to 20mA to further reduce exter-

Components section. MAX13410E/MAX13411E do not have

has a 5V output and is industrially compatible

pinout. This allows for easy replacement in existing designs.

The MAX13410E-MAX13415E feature a 1/8-unit load

Receiver input impedance, up to 256 rpm allowed -

on the bus. All driver outputs are ESD protected using the Human Body Model. These devices also

Includes fail-safe circuitry (MAX13410E/MAX13411E/)

MAX13414E/MAX13415E only), guaranteed logic - when receiver input is on, receiver output is high

or short. The receiver outputs a logic high when the transmitter on the bus is disabled (high)

impedance). The MAX13412E/MAX13413E feature Maxim's propri-

etary AutoDirection control. This architecture can eliminate the need for DE and RE control signals. in isolation

applications, this reduces the cost and size of the system for TEM by reducing the number of optical isolators required.

MAX13410E/MAX13412E/MAX13414E Features

Reduced slew rate drivers, minimizes EMI and reduces interface MAX13412EESA+T

reflections caused by incorrect cable ends,

Allows error-free transmission up to 500kbps. The interface of the MAX13412EESA+T

MAX13411E/MAX13413E/MAX13415E are not slew rate interfaces MAX13412EESA+T

Limited, allowing transfer speeds up to 16Mbps.

MAX13410E-MAX13415E have 8 pins

Therefore, packing with exposed paddles increases power

dissipative and operates at extended -40°C to

+85°C temperature range.

Shenzhen Tianzhuo Weiye Electronics Co., Ltd.

In the past 10 years, Shenzhen Tianzhuo Weiye Electronics Co., Ltd. has seized the historical opportunities brought by China's reform and opening up and the rapid development of the electronics industry, adhered to customer-centricity and high-quality products as the foundation, and provided customers with one-stop procurement services for components. Won the respect and trust of customers, from an entrepreneurial company based in Huaqiangbei, Shenzhen Special Economic Zone, China, it has grown steadily into an electronic component supplier with several well-known brand product lines and customers in many countries and regions around the world. The electronic IC and 3C distributed and wholesaled sell well in the consumer market and enjoy a high status among consumers. The company has established long-term and stable cooperative relations with many retailers and agents.