ADS8-V1EBZ

The ADS8-V1 can be used as a data acquisition board when connected to specified ADI high-speed ADC evaluation boards. The FPGA on the ADS8-V1 is designed to support the highest speed JESD204B analog-to-digital converter, acting as a data receiver, while the ADC is a data transmitter.

Advantages and Features

Xilinx Kintex Ultrascale XCKU040-3FFVA1156E FPGA.

One (1) FMC+ connector.

Twenty (20) 16Gbps transceivers supported by one (1) FMC+ connector.

DDR4 SDRAM.

Simple USB 3.0 port interface.

The AD9213 is a single-channel, 12-bit, 6 GSPS/10.25 GSPS, radio frequency (RF) analog-to-digital converter (ADC) with a 6.5 GHz input bandwidth. The AD9213 supports high dynamic range frequencies and time domain applications that require wide instantaneous bandwidth and low conversion error rate (CER). The AD9213 features a 16-lane JESD204B interface to support maximum bandwidth capability.

The AD9213 achieves dynamic range and linearity performance while consuming less than 4.6 W (typ). Based on an interleaved pipeline architecture, the device uses proprietary calibration and randomization techniques to suppress interleaving spurious artifacts that mix into its noise floor. The AD9213 maintains linearity performance through a combination of on-chip dither and calibration, resulting in excellent spurious-free performance over a wide range of input signal conditions.

Applications requiring smaller instantaneous bandwidth can benefit from the AD9213's on-chip digital signal processing (DSP) capability, reducing the output data rate and the number of JESD204B channels required to support the device. The DSP path includes a digital downconverter (DDC) with an integrated 48-bit, numerically controlled oscillator (NCO) followed by an I/Q digital decimator stage that supports selectable decimation rates of 2x or 3x decimation factors. For fast frequency hopping applications, the AD9213 NCO supports up to 16 profile settings with individual trigger inputs, enabling a wide monitoring frequency range with fewer JESD204B channel counts.

The AD9213 supports sample-accurate multi-chip synchronization including NCO synchronization. The AD9213 is available in a 192-pin ball grid array (BGA) package and is rated for a junction temperature range of -20°C to +115°C.

The ADS8-V1 can be used as a data acquisition board when connected to specified ADI high-speed ADC evaluation boards. The FPGA on the ADS8-V1 is designed to support the highest speed JESD204B analog-to-digital converter, acting as a data receiver, while the ADC is a data transmitter.

Advantages and Features

Xilinx Kintex Ultrascale XCKU040-3FFVA1156E FPGA.

One (1) FMC+ connector.

Twenty (20) 16Gbps transceivers supported by one (1) FMC+ connector.

DDR4 SDRAM.

Simple USB 3.0 port interface.

The AD9213 is a single-channel, 12-bit, 6 GSPS/10.25 GSPS, radio frequency (RF) analog-to-digital converter (ADC) with a 6.5 GHz input bandwidth. The AD9213 supports high dynamic range frequencies and time domain applications that require wide instantaneous bandwidth and low conversion error rate (CER). The AD9213 features a 16-lane JESD204B interface to support maximum bandwidth capability.

The AD9213 achieves dynamic range and linearity performance while consuming less than 4.6 W (typ). Based on an interleaved pipeline architecture, the device uses proprietary calibration and randomization techniques to suppress interleaving spurious artifacts that mix into its noise floor. The AD9213 maintains linearity performance through a combination of on-chip dither and calibration, resulting in excellent spurious-free performance over a wide range of input signal conditions.

Applications requiring smaller instantaneous bandwidth can benefit from the AD9213's on-chip digital signal processing (DSP) capability, reducing the output data rate and the number of JESD204B channels required to support the device. The DSP path includes a digital downconverter (DDC) with an integrated 48-bit, numerically controlled oscillator (NCO) followed by an I/Q digital decimator stage that supports selectable decimation rates of 2x or 3x decimation factors. For fast frequency hopping applications, the AD9213 NCO supports up to 16 profile settings with individual trigger inputs, enabling a wide monitoring frequency range with fewer JESD204B channel counts.

The AD9213 supports sample-accurate multi-chip synchronization including NCO synchronization. The AD9213 is available in a 192-pin ball grid array (BGA) package and is rated for a junction temperature range of -20°C to +115°C.

Shenzhen Yujixin Electronics Co., Ltd.

Contact: Mr. Xiao

Mobile: +86-134-3077-2257 (Same number on WeChat)

Tel: +86-0755-2870-8773

QQ: 1157099927 2039672975

E-mail: xiaozheng1608@163.com