NTR4501NT1G

  • 2022-09-24 20:26:29

NTR4501NT1G

NTR4501NT1G ON 20V 80mOhm 1.25W MOSFET-SOT-23 advantage original spot

NTR4501NT1G product detailed specifications

DatasheetNTR4501NT1G datasheet

Standard package 3,000

FET Type MOSFET N-Channel, Metal Oxide

FET FeaturesLogic Level Gate

Drain-to-source voltage (VDSS) 20V

Current - Continuous Drain (Number) @ 25°C 3.2A

Rds (max) @ ID, VGS80 mOhm @ 3.6A, 4.5V

VGS (TH) (max) @ Id1.2V @ 250µA

Gate Charge (Qg) @ VGS6nC @ 4.5V

Input Capacitor (Ciss) @ 200pF of Vds @ 10V

Power - 1.25W max

Mounting Type Surface Mount

Bag/Box TO-236-3, SC-59, SOT-23-3

Supplier Device Package SOT-23-3 (TO-236)

Packaging Tape & Reel (TR)

Packaging 3SOT-23

Channel Mode Enhancement

Maximum drain-source voltage 20 V

Maximum continuous drain current 3.2 A

RDS - at 80@4.5V mOhm

Maximum gate-source voltage ±12 V

Typical turn-on delay time 6.5 ns

Typical turn-off delay time 12 ns

Typical fall time 3 ns

Operating temperature -55 to 150 °C

Install the Surface Mount

Standard Packaging Tape & Reel

Maximum gate-source voltage ±12

EU RoHS Directive Compliant

Maximum working temperature 150

Standard package name SOT-23

Minimum operating temperature -55

Channel TypeN

Package Tape and_Reel

Maximum drain-source resistance 80@4.5V

Maximum drain-source voltage 20

Number of components per chip 1

Supplier Package SOT-23

Maximum power dissipation 1250

Maximum continuous drain current 3.2

Number of pins 3

Lead Shape Gull-wing

FET Features Logic Level Gate, 2.5V Drive

Mounting Type Surface Mount

Current - Continuous Drain (Id ) @ 25 °C 3.2A (Ta)

Vgs(th) (max) @Id1.2V @250µA

Supplier Equipment Package SOT-23-3 (TO-236)

Other namesNTR4501NT1GOSTR

On Rds (max) @ Id, V GS80 mOhm @ 3.6A, 4.5V

FET Type MOSFET N-Channel, Metal Oxide

Power - 1.25W max

Drain to source voltage (Vdss) 20V

Input Capacitance (Ciss) @ VDS200pF @ 10V

Gate Charge (Qg) @ VGS6nC @ 4.5V

Package/Enclosure TO-236-3, SC-59, SOT-23-3

RoHS Directive Lead free / RoHS Compliant

CategoryPower MOSFET

Configure Single

Dimensions 2.9 x 1.3 x 0.94mm

Height 0.94mm

Length 2.9mm

Maximum drain-source resistance 0.08 Ω

Maximum operating temperature +150 °C

Maximum power dissipation 1.25 W

Minimum operating temperature -55 °C

Packaging Type SOT-23

Typical Gate Charge @ VGS2.4 nC V @ 4.5

Typical Input Capacitance @ VDS200 pF V @ 10

Width 1.3mm

Drain current (max) 3.2 A

Frequency (Max) Not Required MHz

Gate-source voltage (max) ~12 V

Output power (max) Not Required W

Power dissipation 1.25 W

Noise Figure Not Required dB

Drain-source on-resistance 0.08 ohm

Operating temperature range -55C to 150C

Polarity N

Type Power MOSFET

Number of components 1

Operating temperature classification Military

Drain efficiency Not Required %_Drain-source turn-on voltage 20 V

Power Gain Not Required dB

Arc hardeningNo

Continuous drain current 3.2 A

Transistor Polarity: N Channel

Continuous Drain Current Id: 3.2A

Drain Source Voltage Vds: 20V

On Resistance Rds(on): 80mohm

Rds(on) Test Voltage Vgs:4.5V

Threshold Voltage Vgs: 1.2V

Power consumption: 1.25W

Operating Temperature Min:-55°C

Operating Temperature Max: 150°C

Transistor Case Style: SOT-23

No. of Pins: 3

MSL:MSL 1 - Unlimited

SVHC: No SVHC (20-Jun-2013)

Current Id Max: 3.2A

Operating temperature range: -55°C to +150°C

Termination Type: SMD

Voltage Vds Type: 20V

Voltage Vgs Max: 1.2V

Voltage Vgs Rds on Measurement: 4.5V

Weight (kg)0.000008

Tariff No.85412900

associatedIRLML2502TRPBF

PMV40UN215

IRLML6246TRPBF

Looking forward to 2020, Li Changming, chairman of Taiwan Circuit Board Association (TPCA), believes that thanks to the drive of 5G high-frequency and high-speed communication, the overall supply chain including PCB materials, processes, and equipment will rise by a level, such as the board area will become larger. , the number of layers increases, the lines become thinner, etc., the increase in technology will drive the increase in the unit price of products, and it is optimistic that 5G-related products will continue to increase, and PCB will also grow in "quality" and "quantity" simultaneously. It is expected that the overall PCB industry output value in 2020 will be higher than this year. Flat and slightly growing.

TPCA said that in 2020, the number of global 5G base construction is estimated to reach 1 million to 1.2 million, and mainland China will occupy about 600,000 to 800,000, with a coverage rate approaching 10%. In addition, the estimated shipments of 5G smartphones It will be close to 200 million, and the business opportunities for the derived components are huge.

The demand for "quality" has led to an increase in the proportion of high-end products. 5G applications range from base station construction, 5G mobile phones, terminal communication equipment to various 5G application fields. Due to the working environment of high-frequency/high-speed signals, many devices have zero Components have been significantly upgraded in specifications. For example, the core chip in the 5G base station. Due to the substantial increase in the number of I/Os and chip area, the high unit price ABF carrier board replaces the BT carrier board; the unit price of the base station antenna has also more than doubled. A millimeter-wave 5G mobile phone only includes PCB, RF components, AiP (integrated antenna package), and a camera module costing about $100.

The increase in "quantity" creates economies of scale for manufacturers. It is expected that in the 5G era, the frequency bands will increase from 15 in the current 4G era to 30, and the filters of each mobile phone will increase from 40 to 70, and the number of Switch switches The number of conferences will also be increased from 10 to 30, and the number of PAs will also be doubled. The newly derived AiP antennas have 3 to 5 on the mobile phone side, and as many as 20 to 25 on the communication device side. When manufacturers increase capital expenditures one after another, it is easier to form economies of scale for large manufacturers.

Xinrui Electronics (Hong Kong) Co., Ltd., a professional component distributor (authorized and non-authorized brands) for 18 years, one-stop terminal manufacturer supporting: (quality assurance and integrity management) is the company's commitment to provide customers with brand original semiconductors, electronic products Component terminal supporting market, focusing on ESD/TVS electrostatic protection diodes, LDO low-power voltage regulators, MOS tubes, battery charging and management power supplies, LEDs, optocouplers, resistors and capacitors, PCB solutions (wireless Bluetooth solutions, One-stop Bluetooth sports solution, speaker, wireless power bank).

Main products: ESD electrostatic diodes, TVS diodes, battery charging and management power supplies, MOS tubes, LDO low-power voltage regulators.

Company: Xinrui Electronics (Hong Kong) Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com

Part of the company's stock:

TLV70433DBVR、TP4101、TP5100、TP4056、RT9013-33PB、TPS73618DBVR、MIC5255-3.0YM5、CDSOT23-T36C、CDSOT23-24C、TL431CDBZR、TL431IDBZR、TLV1117CDCYR、LM317EMPX、NCP1117ST33T3G、NCP1117ST50T3G、PESD5V0V1BL、PESD5V0V1BSF、PESD2CAN、PESD5V0S1BA、PESD12VS2UT、PESD15VL2BT , PESD36VS2UT, PESD3V3L1BA, PESD24VL2BT, IP4220CZ6, IP4223CZ6, BCP56-16, BCP51-16, BSN20, uClamp0511T.TCT, SRV05-4.TCT, RCLAMP0531T.TCT, RCLAMP0502A.TCT, SD05C.TCT, SRAMP05.TCT 、ESD5Z2.5T1G、ESD5Z3.3T1G、CM1213A-01SO、CM1213A-04SO、NTR4501NT1G、NTR4502PT1G、NTR4170NT1G、NTR4171PT1G、RLST23A032C、RLST23A0122C、RLST23A052C、PRTR5V0U2X、GBLC03CI-LF-T7、GBLC03C-LF-T7、GBLC05CI-LF-T7 , GBLC05C-LF-T7, GBLC08CI-LF-T7, GBLC08C-LF-T7, GBLC12CI-LF-T7, GBLC12C-LF-T7, GBLC15CI-LF-T7, GBLC24CI-LF-T7, GBLC24C-LF-T7, PSD03C -LF-T7, PSD05-LF-T7, PSD05C-LF-T7, PSD08C-LF-T7, PSM712-LF-T7, AO3400, AO3400A, AO3401A, AO3402, TPSMB6.8CA-E3/52, TPSMB6.8A, TPSMB47A , TPSMB43A, TPSMB39A, TPSMB36A, TPSMB33A, TPSMB30A, STTH208, , IRLML2502TRPBF, TP4101, IRLML6401TRPBF, TLV70433DBVR, PESD5V0S1BB, PSM712-LF-T7, NTR4171PT1G, SGM2 036-3.3YUDH4G/TR, SGM2036-1.8YUDH4G/TR, DMN2046U-7, etc.

For more models, please inquire:

Xinrui Electronics (Hong Kong) is a professional supplier of integrated circuits and has many years of sales experience in our bank! With a large stock of stock, integrity-based, customer first, the quality of products for customers!

Due to the large number of company models, it is impossible to upload them one by one. If you can't find the product you want on the website, please contact the salesperson. Our company can provide electronic components distribution service.

Company: Xinrui Electronics (Hong Kong) Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com

NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G

NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G NTR4501NT1G

TSMC, UMC and Powerchip have successively set up 12-inch fabs in mainland China, but they have not yet reached the economic scale, and all operations are at a loss. Euronews file photo

TSMC, UMC and Powerchip have successively set up 12-inch fabs in mainland China, but they have not yet reached the economic scale, and all operations are at a loss. According to statistics, the total loss in the first half of this year was nearly 10 billion yuan (NTD, the same below).

Aiming at the rapid growth of the Chinese mainland market, Taiwanese foundries have invested in 12-inch fabs in mainland China. Among them, UMC is the first manufacturer to set up 12-inch fabs in mainland China, and the 12-inch fab in Xiamen is early. Mass production was launched in the fourth quarter of 2016.

Powerchip's 12-inch fab in Hefei then started mass production in October 2017, and TSMC's 12-inch fab in Nanjing started mass production in October 2018.

Leadcore currently has a monthly production capacity of 18,000 pieces, mainly based on the 28-nanometer process; Jinghe has a monthly production capacity of about 15,000 to 20,000 pieces, based on 90-nanometer process technology, mainly producing panel driver ICs. TSMC's Nanjing plant has the most advanced process technology, reaching 16 nanometers, with a monthly production capacity of about 12,000 pieces.

TSMC Nanjing Plant, Lianxin and Jinghe have not yet reached the economic scale, and all operations are currently operating at a loss. According to the financial reports of TSMC, UMC and Powerchip, TSMC Nanjing plant lost NT$2.292 billion in the first half of the year, and Lianxin lost NT$5.234 billion. In NT dollars, Jinghe lost NT$2.309 billion, with a total loss of NT$9.835 billion.

According to TSMC's plan, the monthly production capacity of the Nanjing 12-inch plant will be expanded to 15,000 pieces by the end of this year, and will reach the initial goal of 20,000 pieces of monthly production next year. Jinghe's monthly production capacity can reach a maximum of 40,000 pieces, but it will be expanded depending on the actual market demand.

Leadcore's initial target is 25,000 pieces per month. According to internal estimates, if the monthly production capacity reaches 25,000 pieces, it will have the opportunity to turn losses into profits. However, there is currently no specific timetable for expanding production to 25,000 pieces.

AOZ8808DI-05、AOZ1284PI、AOZ1280CI、AOT11N70、AON7934、AON7544、AON7534、AON7524、AON7520、AON7506、AON7423、AON7421、AON7418、AON7410、AON7409、AON7407、AON7405、AON7403、AON7401、AON7296、AON7264E、AON6522、AON6512、AON6508、 AON6504、AON6414AL、AON6262E、AON5820、AON2801、AOD603A、AOD516、AOD484、AOD482、AOD478、AOD444、AOD4185、AOD4184L、AOD4184A、AOD4132、AOD413A、AOD409、AOD417、AOD407、AOD403、AO8822、AO8810、AO3414、AO3402、AO4606、 AO4485、AO4453、AO4447AL、AO4443、AO4468、AO4435、AO4421、AO4419、AO4407AL、AO4406AL、AO4354、AO4292、AO4264E、AO3485、AO3481、AO3480、AO3423、AO3422、AO3416、AO3415AL、AO3415、AO3407A、AO3401A、AO3400A

Hong Kong Xinrui Electronics Co., Ltd. is a professional supplier of integrated circuits and has many years of sales experience in the bank! With a large stock of stock, integrity-based, customer first, the quality of products for customers!

Due to the large number of company models, it is impossible to upload them one by one. If you can't find the product you want on the website, please contact the salesperson. Our company can provide electronic components distribution service.

Company: Hong Kong Xinrui Electronics Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com