AD9213BBPZ-10G

feature

High Instantaneous Dynamic Range NSW -155 dBFS/Hz, 10 GSPS with -9 dBFS, 170 MHz input

-153 dBFS/Hz, 10 GSPS with -1 dBFS, 170 MHz input SFDR: 70 dBFS at 10 GSPS, -1 dBFS with 1000 MHz input

SFDR, excluding H2 and H3 (worst other distances): 89 dBFS 10 GSP with -1 dBFS, 1000 MHz input Low power consumption: <4.6 W, typ. 10 GSPS

Integrated input buffer (6.5GHz input bandwidth) 1.4V pp full-scale analog input, RIN=50Ω overvoltage protection 16 JESD204B outputs (up to 16 Gbps line rate)

Multi-chip synchronization with 1 sample accuracy including DDC NCO synchronization Integrated DDC selectable decimation factor 16 Profile settings for fast frequency hopping Fast overrange detection for efficient AGC

On-chip temperature sensor chip, on-chip negative voltage generator Low CER: <1×10?16, 12 mm×12 mm, 192-ball BGA-ED package

General Instructions

The AD9213 is a single 12-bit 6 GSPS/10.25 GSPS radio frequency (RF) analog-to-digital converter (ADC) with 6.5GHz input bandwidth. AD9213 supports high dynamic frequency and wide time range applications

Instantaneous bandwidth and low conversion error rate (CER).

The AD9213 has a 16-channel JESD204B interface to support maximum bandwidth capability.

The AD9213 achieves dynamic range and linearity performance while consuming less than 4.6 W. The device is based on a staggered pipeline architecture with proprietary suppressed calibration and randomization techniques

Spurious artifacts interleave into its noise floor. Linearity The performance of the AD9213 is a combination of on-chip jitter and calibration, resulting in very good spurious-free performance conditions for a wide range of input signals

Applications that require less instantaneous bandwidth can benefit from the ability of the on-chip digital signal processing (DSP) AD9213 to reduce output data rates. DSP path includes digital downconverter (DDC)

Using a 48-bit Numerically Controlled Oscillator (NCO), the I/Q digital decimator stage is then decimated by a ratio of two to three factors that allows selection. For fast frequency hopping applications, the AD9213 NCO supports up to 16 profile settings with separate trigger inputs, allowing a wide range of monitoring frequencies to reduce the JESD204B lane count.

The AD9213 supports sample-accurate multi-chip synchronization including NCO synchronization. The AD9213 is available in a 192 ball grid array (BGA) package specified over the -20°C to +115°C junction temperature range.

Manufacturer: Analog Devices Inc.

Product Category: Analog to Digital Converter - ADC

Series: AD9213

Installation style: SMD/SMT

Package/Case: BGA-192

Resolution: 12 bit

Number of channels: 1 Channel

Interface type: SPI

Sampling ratio: 10 GS/s

Input Type: Differential

Structure: Pipeline

Analog Supply Voltage: 1.95 V to 2.05 V

Digital Supply Voltage: 1.95 V to 2.05 V

SNR – Signal to Noise Ratio: 55.9 dB

Minimum operating temperature: - 20 C

Maximum operating temperature: + 115 C

Package: Tray

Number of Converters: 1 Converter

Product: Analog to Digital Converter

Type: Radio Frequency

Brand: Analog Devices

Reference type: External, Internal

Shutdown: No Shutdown

Development Kit: AD9213-10GEBZ

DNL - Differential Nonlinearity: 0.3 LSB

ENOB - effective number of bits: 8.9 bit

Gain Error: 7.4 %/FS

INL - Integral Nonlinearity: 2.4 LSB

Moisture Sensitivity: Yes

Pd-Power Dissipation: 5.93 W

Product Type: ADCs - Analog to Digital Converters

Reference voltage: 0.5 V

SFDR - Spurious Free Dynamic Range: 70 dBc

SINAD - Signal to Noise and Distortion: 55.6 dB

Factory Pack Quantity: 189

Shenzhen Yujixin Electronics Co., Ltd.

Contact: Manager Xiao

Mobile: +86-134-3077-2257 (Same number on WeChat)

Tel: +86-0755-2870-8773

QQ: 1157099927 2039672975

E-mail: xiaozheng1608@163.com