-
2022-09-24 20:26:29
Original spot DAC2815D dual DC-DC converter
DAC2815D: Dual DC-DC Converters. Company advantage inventory.
feature:
Wave Solder Package
All ceramic capacitors
surface mount magnetic
80 Volt Input Transient Tolerance
Wide power supply range -11V to 50V
High isolation -500V
High power density - 15 W/in3
Both outputs are fully regulated
Tracking Output Voltage Adjustment - Standard
Remote shutdown
Operates at 5W to 11V input
Provides ±12V or ±15V output
Contact MSK for MIL-PRF-38534 Eligibility Status
describe:
series
feature:
The DAC2812D and DAC2815D DC-DC converters provide the ruggedness, reliability and functionality required
To meet the advanced design challenges of today's Hi-rel market. This has been done while preserving
15 W/in3 power density and 375 mW/gram power/package performance. Use advanced
Substrate and reflow soldering techniques during construction enable robust, cost-effective and
Fully solderable package.
The DAC2800D hybrid converter family utilizes all ceramic capacitors, surface mount magnetics and
Ultrasonic welding wire provides reliable operation at all operating temperatures.
The DAC2800D series has two fully regulated tracking outputs. Standard features include output faults
Monitor and/or turn on voltage point programming via shutdown pins. All three functions may be
Also implements minimal external components. Output Voltage Regulation/Load
Compensation pins that compensate both outputs at the same time are also standard.
A fault-tolerant design protects these converters from most external circuit failures. ± output and output
The adjust pin will be 25 V tolerant and the shutdown pin will be 50 V, protecting the converter
Due to various system or board failures; e.g. solder bridges etc. Unique load fault protection circuitry allows
The converter pulls up difficult loads with static load line characteristics and allows short-term loads
In most applications, the offset is significantly out of specification.
A transformer-isolated flyback converter topology with a switching frequency of 400 kHz allows
Operates over a wide input voltage range. Internal filtering of the output eliminates the need for external
capacitors in many applications.
The 8-pin package is hermetically sealed and isolated from the internal circuitry. heat sink is
It is recommended to run at full power in high temperature environments.
DAC2815D DAC2812D
DAC2815S
DAC2812S
BBF2815S
BBF2812S
BBF2805S
BBF2803S
DHD2805S
DHC2805S
DHC2803S
DHC2803S