The ADM3057E is a 3 kV RMS isolated controller area network (CAN) physical layer transceiver with an integrated isolated DC/DC converter and supports data rates up to 12 Mbps. The device meets Flexible Data Rate (CAN FD) requirements to operate at speeds up to 5 Mbps or higher, and is compliant with the ISO 11898-2:2016 standard.

CAN FD Compliant Isolated Transceiver with isoPower™ Integrated Isolated DC/DC Converter up to 12 Mbps. The device passes EN 55022 / CISPR 22 Class B emissions on a 2-layer board, reducing design complexity, and also meets 11898-2:2016's 5 Mbps requirements and future 12 Mbps with 5.7 kV isolation requirements.

feature

CAN transceiver with 3 kV RMS signal and power isolation

isoPower Integrated Isolated DC/DC Converter

1.7 V to 5.5 V logic level VIO pin

Compliant with ISO 11898-2:2016 (CAN FD)

CAN FD data rates up to 12 Mbps

Low maximum loop propagation delay: 150 ns

Extended Common Mode Range: ±25 V

Bus fault protection: ±40 V on CANH and CANL pins

Low-power standby supports remote wake-up request

Additional isolated signal for control (e.g. termination switch)

Pass EN 55022 Class B 6 dB

Slope Control Reduces EMI

Creepage and Clearance: 7.8 mm minimum at 20-pin SOIC_W

High Common Mode Transient Immunity: > 75 kV/μs

Industrial operating temperature range: ~40°C to +105°C

Application field

CANOpen, DeviceNet and other CAN bus applications

automated industry

Process Control and Building Control

transport and infrastructure

ADM3057ETRWZ-EP, ADM3057EBRWZ-RL, ADM3057ETRWZ-EP-RL