WPA11-3050A: 1.0 – 1.10 GHz 50W Power Amplifier Module. Company advantage inventory.

WPA11-3050A is high power and high linearity

amplifier. The amplifier provides 30.0 dB gain, 47.0 dBm Psat and

55 dBm IP3 output over the frequency range of 1.0 GHz to 1.10

GHz.

WPA11-3050A designed for avionics communications

and measurement applications. it can work continuously

or pulse mode.

WPA11-3050A is designed for ruggedness

MIL-STD-202, MIL-STD-883 and MIL-STD-810F standards.

Main features:

Operation class: AB

Operating Mode: Continuous or Pulse

MTBF2: > 150,000 hours (17 years)

Impedance: 50 ohms

Output IP3: 55.0 dBm

Yield: 30.0

Gain Flatness: +/- 0.5 dB

Input VSWR: Typical 1.22:1

Output VSWR: Typical 1.22:1

Peak: 47.0 dBm

Single supply: 800 mA @ +28 V (static), 4.4 A at Psat

Frequency range: 1.0 to 1.10 GHz

Working box temperature: -40?+85oC

Miniature design: SMA F RF port, pass-through +28V port and 2.00" x 3.5" x 0.70"

WPA series high power amplifiers are based on HFF technology with high power and excellent linearity, such amplifiers provide IP3 from 50dBc to 70dBc with higher conversion efficiency than traditional feedforward amplifiers (FFA), and the cost is higher than traditional feedforward amplifiers The amplifier is lower, the internal circuit is simpler than the feedforward amplifier (FFA), and the linearity is better than any kind of predistortion power amplifier.

[1] Huang's feedforward linear amplification method.

Special note: For all amplifier series products, if Unconditional Stable is marked in the product datasheet, k>1, then customers do not need to install isolators in the front and rear stages when using this amplifier product.

is a wireless and networking telecommunications company and a leading supplier of design/manufacture of RF/microwave low noise amplifiers, power amplifiers and subsystems. strong design capabilities,

High-performance products and large-capacity functions are core competencies. Standard products include low noise amplifiers (LNA), highly linear power amplifiers (PA) and subsystems.

In addition to standard products, WanTcom also offers custom products to optimize performance, cost and solution for your specific application. All products are made in the USA.

Offers RF and microwave amplifiers and associated subsystems with ultra-low noise figures of 0.25 dB and ultra-high IP3 of 60 dBm for cellular phone base stations,

RF and microwave communications, MRI imaging, point-to-point communications, and test and measurement.

Provide original equipment manufacturers (OEMs) with high performance and high quality products that meet MIL-STD-202g and MIL-STD-883g.

WHM series company advantage inventory:

WHM02AE

WHM02R

WHM0003AE

WHM0003BE

WHM0005R

WHM0012AE

WHM0012BE

WHM0020AE

WHM0035AE

WHM0105AE

WHM0110AE

WHM0110N

WHM0206AE

WHM0208AE

WHM0210R

WHM0220R

WHM0242AE

WHM0305AE

WHM0510AE

WHM0520-18AE

WHM0525AE

WHM0526AE

WHM0530AE

WHM0545AE

WHM06AE

WHM0814AE

WHM0814BE

WHM0815AE

WHM0913AE

WHM0913R

WHM1014AE

WHM1030AE

WHM1045AE

WHM1115AE

WHM11-2830AE

WHM1318R

WHM1319AE

WHM13-3530A

WHM13-3530AE

WHM14-3020AE

WHM14-3020BE

WHM14-3535AE

WHM1535AE

WHM1722AE

WHM19-1730AE

WHM19-3032AE

WHM2025AE

WHM2026AE

WHM2040AE

WHM2060AE

WHM2227AE

WHM25-1525AE

WHM25-3020AE

WHM2535-12AE

WHM2540AE

WHM3035AE

WHM3043AE

WHM3542AE

WHM5065AE

WHM0002AE

WHM0006AE

WHM0010AE

WHM0013AE

WHM0015AE

WHM005-15AE

WHM0104AE

WHM0205AE

WHM0715AE

WHM0425LE

WHM0913LE

WHM1020LE

WHM1045LE

WHM1045RLE

WHM1216AE

WHM14-2035LE

WHM14-3020LE

WHM14-3035L

WHM14-3035LE

WHM2026L

WHM2535LE

WHM30-2525LE