TLK2711HFGQMLV imported original genuine goods in stock-Yujixin Electronics

5962-0522101VXC

TLK2711HFG/EM

The main application of the TLK2711-SP is to pass a controlled impedance of about 50Ω

The media provides high-speed I/O data channels for point-to-point baseband data transfer.

Transmission media can be printed circuit boards, copper or fiber optic cables. data transmission

The maximum speed and distance of the transmission depends on the attenuation characteristics of the medium and the noise of the environment.

acoustic coupling.

characteristic

1? 1.6Gbps to 2.5Gbps (gigabits per second) serializer/deserializer

Hot plug protection

High-Performance 68-Pin Ceramic Quad Flatpack (HFG)

low power operation

Programmable pre-emphasis level on serial output

Interface to backplane, copper cable or optical converter

On-chip 8-bit/10-bit encode/decode, comma detection

On-chip PLL provides clock synthesis with low-speed reference

Low power consumption: < 500mW

3-V Tolerance on Parallel Data Input Signals

16-bit parallel TTL compatible data interface

Ideal for high-speed backplane interconnects and point-to-point data links

Military temperature range (-55°C to 125°C case)

Loss of Signal (LOS) Detection

Integrated 50Ω termination resistor on RX

Engineering Evaluation (/EM) Samples Available (1)

2 Applications

Point-to-point high-speed I/O

data collection

data processing

3 Description

TLK2711-SP belongs to WizardLink transceiver of multi-gigabit transceiver

A series of devices designed for ultra-high-speed bidirectional point-to-point data transmission systems.

The TLK2711-SP supports an efficient serial interface from 1.6Gbps to 2.5Gbps

mouth speed, can provide up to

2Gbps data bandwidth.

These parts are for engineering evaluation only. It was dealt with in a non-compliance process

(e.g. without aging, etc.) and only at the rated temperature of 25°C

tested under the hood. These parts are not suitable for quality inspection, production, radiation testing or

flight. These parts are not rated for the full MIL rated temperature of –55°C to 125°C

performance is guaranteed over the range or operating life.