R5F1016EASP#V0

Low-power, high-function, rich-configuration general-purpose microcontroller standard

True low power platform (down to 66µA/MHz, 0.57µA for RTC+LVD), 1.6V to 5.5V operation, 16 to 512 kbyte flash, 41 dmips at 32 MHz for general use

feature

Ultra-low power technology

vdd=1.6 to 5.5 V single supply voltage

stop mode

stop mode

sleep mode

RL78 CPU core CISC architecture with three-stage pipeline Minimum instruction execution time: can be changed from high-speed (0.03125 ms: @32 MHz operation with high-speed on-chip oscillator) to ultra-low speed (30.5 ms: @32.768 kHz, with subsystem run clock)

Address Space: 1 MB General Purpose Registers: (8-bit Registers x8) x4 Banks On-Chip RAM: 2 to 32KB

Flash Code Code Flash: 16 to 512 kb Block Size: 1 KB Block Erase and Rewrite Function Disabled) On-Chip Debug Function

Self-Programming (with Boot Swap Function/Flash Shield Window Function) Flash Data Data Flash: 4 KB to 8 KB Background Operation (BGO): Flash data can be rewritten during rewriting. Number of rewrites: 1,000,000 times (typical) Rewrite voltage: Vdd=1.8 to 5.5 V 2 MHz and 1 MHz high accuracy: +/-1.0% (vdd=1.8 to 5.5 V, ta=-20 to +85/c)

Operating ambient temperature Ta=-40 to +85%C (A: Consumer application, D: Industrial application Ta=-40 to +105oC (G: Industrial application) Power management and reset function On-chip power-on reset circuit On-chip voltage detector (LVD) (select interrupt and reset from level 14)

Number of clocks during transfers between 8/16 bits for 2/4 channels of the direct memory access controller SFR and internal RAM: 2 clock multipliers and dividers/multipliers 16 bits x 16 bits = 32 bits (unsigned or Signed) 32 bits ÷ 32 bits = 32 bits (unsigned) 16 bits × 16 bits + 32 bits = 32 bits (unsigned or signed) Serial interface CSI: 2 to 8 channels UART/UART (supports LIN bus) : 2 to 4 channels I2c/simplified I2c communication: 2 to 8 channels Timer 16-bit timer: 8 to 16 channels 12-bit Interval timer: 1 channel Real time clock: 1 channel (calendar is 99 years , alarm function and clock correction function) Watchdog timer: 1 channel (can be with dedicated low-speed on-chip oscillator) A/D converter 8/10-bit resolution A/D converter (VDD=1.6 to 5.5 V) Analog Inputs: 6 to 26 channels Internal Reference Voltage (1.45 V) and Temperature Sensor Notes 1 I/O Ports I/O Ports: 16 to 120 (N-CH Open Channel I/O [Withstand Voltage 6V: 0 to 4, N -CH open-drain I/O [VDD withstand voltage Note 2/EVDD withstand voltage Note 3: 5 to 25) can be set to n-ch open-drain, TTL input buffer, and potential interfaces with different on-chip pull-up resistors : Can be connected to 1.8/2.5/3V devices In-chip key interrupt function In-chip clock output/buzzer output controller Other in-chip BCD (binary coded decimal) correction circuit Note 1. Can only be selected in hs (high speed master) Mode 2. 20-52 pin product three. 64- to 128-pin products Note: Installed features depend on product. See 1.6 Functional Overview.

Manufacturer: Renesas Electronics

Product Category: 16-bit Microcontroller - MCU

RoHS: Details

Installation style: SMD/SMT

Package/Case: LSSOP-20

Core: RL78

Data bus width: 16 bit

Maximum clock frequency: 32 MHz

Program memory size: 64 kB

Data RAM size: 4 kB

ADC resolution: 8 bit/10 bit

Number of inputs/outputs: 16 I/O

Operating Supply Voltage: 1.6 V to 5.5 V

Minimum operating temperature: - 40 C

Maximum operating temperature: + 85 C

Series: RL78/G13

Package: Tray

Product: MCU

Program Memory Type: Flash

Brand: Renesas Electronics

Data Ram Type: RAM

Interface Type: CSI, I2C, LIN, UART

Analog Supply Voltage: 1.6 V to 5.5 V

Moisture Sensitivity: Yes

Number of ADC channels: 6 Channel

Product Type: 16-bit Microcontrollers - MCU

Factory Packing Quantity: 240

Subcategory: Microcontrollers - MCU

Supply Voltage - Maximum: 5.5 V

Supply Voltage - Min: 1.6 V

Watchdog Timer: Watchdog Timer