? Summary of the characteristics of the 32-bit controller SAK-TC1796-256F150E BD

? High performance 32-bit super-scalar TriCore V1.3 CPU with quad-pipeline - Superior real-time performance Powerful bit processing Fully integrated DSP functions - Single-precision floating point unit (FPU) - 150 MHz operation over full temperature ? 32-bit control Controller SAK-TC1796-256F150E BD 32-bit Processor with Peripheral Control Single Cycle Instruction (PCP2) - 16k Parameter Memory (Baby Stroller) - 32kbyte Code Memory (CMEM)? 32-bit Controller SAK-TC1796-256F150E BD Multiple On-Chip Memory - 2 Mbytes Program Flash (PFLASH) and ECC - 128 Kbytes Flash Data Memory (DFLASH) Available EEPROM Emulation - 136 Kbytes Data Memory (SRAM, LDRAM SBRAM) - 8K Dual Port Memory (DPRAM) - 48 Kbytes Code Temporary Memory (SPRAM) - 16 Kbytes Instruction Cache (ICACHE) - 16 Kbytes BootROM (Brown)? 16-Channel DMA Controller? 32-bit External Bus Interface Unit ( Europe) - 75 dedicated address/data bus clocks, and control lines, synchronous burst Flash access capability? Sophisticated interrupt system, 2 x 255 hardware priority arbitration levels by CPU or PCP2? Efficient on-chip bus structure - two 64-bit local Memory such as between bus, flash and digital 32-bit controller SAK-TC1796-256F150E BD data memory - 32-bit system peripheral bus (SPB) on-chip peripheral and functional unit - 32-bit remote peripheral bus high-speed on-chip peripheral unit reactor - - Two bus bridges (LFI bridge, peripheral control processor with single cycle instructions (PCP2) - 16kbyte parameter memory (PRAM) - 32kbyte code memory (CMEM) framing and overflow error detection - Two high speed synchronous serial channels (SSC) ) with programmable data length and shift direction - Two Serial Microsecond Bus Interface (MSC) serial ports for expansion to external power devices - Two high-speed Micro Link Interface (MLI) serial interprocessor communications The module has four nodes and 128 free allocated message objects Efficient data processing via FIFO buffering and gateway data transfer (one can node support TTCAN function) - two arrays of general purpose timer modules (GPTA) and an additional array of local timer cells ( LTCA2) provides a powerful set of digital signal filtering and timer functions for autonomous and sophisticated input/output management - two 16-channel analog-to-digital converter (ADC) units selectable from 8-bit, 10-bit, or 12 Bit Resolution - A 4-channel Fast Analog-to-Digital Converter Unit (FADC) with Cascaded Comb Filter Hardware Data Reduction: Supports 10-bit resolution with a conversion time of 280 minutes ns?44 Analog input ADC and FADC? 123 digital general purpose I/O lines, 4 input rows? Digital I/O port 3.3 V capability? On-chip debugging support OCD levels 1 and 2 (CPU, PCP3 DMA)? Dedicated emulation device chip multi-core debugging, Tracking and calibration via USB V1.1 interface (TC1796ED) Power management system Clock generation unit, phase locked loop Core supply voltage 1.5 V I/O voltage 3.3 V Full automotive temperature range: -40° to +125 °C·P/PG-BGA-416-4 package