Features 1? > 400 mbps (200-mhz) switching rate? Flow-through pinouts simplify PCB layout? 150-ps Channel-to-Channel slope (typical)? 100 ps differential slope (typical)? Norwegian standard maximum propagation delay? 3.3V power supply design? High impedance LVDS input power down? Low power design (40 mW 3.3-V static) with existing 5V LVDS drivers?? Interoperable accepting small swings (350 mV typical ) Differential signal levels? Supports input failsafe - open, short, operating temperature range: -40°C to +85°C? Available in SOIC and TSSOP packages

2 Applications? Multifunction Printers? LVDS - LVCMOS Translation

The DS90LV048A device is a quad CMOS flow differential line receiver for applications requiring ultra-low power consumption and high data rates. The device uses Low Voltage Differential Signaling (LVDS) technology and supports data rates in excess of 400mbps (200mhz).

The DS90LV048A accepts low-voltage (350 mV typical) differential input signals and converts them to 3-V CMOS output levels. The receiver supports a tri-state function that can be used to multiplex the output. The receiver also supports opening, short selling and termination (100-Ω) input failsafe. The receiver output is high for all failsafe conditions. The DS90LV048A has a flow output for easy PCB layout.

The EN and EN* inputs are combined to control the three-state output. Enable is common to all four receivers. The DS90LV048A and companion LVDS line drivers (eg, DS90LV047A) provide a new alternative to high-power PECL/ECL devices for high-speed point-to-point interface applications.