Original authentic, price advantage, try our best to serve you 0755-88600196/QQ3007281353

The CC2640R2F device is a wireless microcontroller (MCU) targeted for Bluetooth® 4.2 and Bluetooth 5 low energy applications.

This device is part of the SimpleLink® CC26xx family of cost-effective ultra-low power 2.4GHz RF devices. It features very low active RF and MCU current and low power mode current consumption to ensure excellent battery life for small coin cell batteries and in energy harvesting applications.

The SimpleLink Bluetooth low energy CC2640R2F device contains a 32-bit ARM® Cortex®-M3 core (operating at 48MHz as the main processor) and a rich peripheral feature set, including a unique ultra-low power sensor control device. This sensor controller is ideal for connecting external sensors and for autonomously collecting analog and digital data while the rest of the system is in sleep mode. As a result, the CC2640R2F device is ideal for a wide variety of applications where battery life, small size, and ease of use are important.

The power and clock management of the CC2640R2F wireless MCU and the wireless system require specific configurations and are handled by software for proper operation, which is implemented in TI-RTOS. TI recommends that this software framework be used throughout the entire application development process for the device. The complete TI-RTOS and device drivers are freely available as source code from www.ti.com.

This Bluetooth low energy controller and host library are embedded in ROM and run separately on an ARM® Cortex®-M0 processor. This architecture improves overall system performance and power consumption, and frees up large amounts of flash memory for applications.

characteristic

microcontroller

Powerful ARM Cortex-M3

EEMBC CoreMark Score: 142

Clock speeds up to 48MHz

275KB of non-volatile memory, including 128KB of in-system programmable flash memory

Up to 28KB system SRAM, of which 20KB is ultra-low leakage static random access memory (SRAM)

8KB SRAM for cache or system RAM use

2-pin cJTAG and JTAG debug

Support over-the-air upgrade (OTA)

Ultra Low Power Sensor Controller

Can operate autonomously independently of the rest of the system

16-bit architecture

2KB ultra-low leakage code and data SRAM

Stores efficient code size architecture in ROM, loads drivers, TI-RTOS and Bluetooth software, provides more flash space for applications

Package is RoHS Compliant

2.7mm × 2.7mm YFV DSBGA34 package (14 GPIOs)

4mm × 4mm RSM VQFN32 package (10 GPIOs)

5mm × 5mm RHB VQFN32 package (15 GPIOs)

7mm × 7mm RGZ VQFN48 package (31 GPIOs)

Peripherals

All digital peripheral pins can be connected to any GPIO

Four general purpose timer modules

(8 × 16-bit or 4 × 32-bit, both with pulse width modulation (PWM))

12-bit analog-to-digital converter (ADC), 200MSPS, 8-channel analog multiplexer

duration comparator

Ultra Low Power Analog Comparator

Programmable Current Source

UART

2 Synchronous Serial Interfaces (SSI) (SPI, MICROWIRE and TI)

I2C

I2S

Real Time Clock (RTC)

AES-128 Security Module

True Random Number Generator (TRNG)

10, 14, 15 or 31 GPIOs depending on package option used

Supports eight capacitive sensing buttons

Integrated temperature sensor

external system

On-chip internal DC-DC converter

Very few external components

Seamless integration of SimpleLink CC2590 and CC2592 range extenders

Pin Compatible with SimpleLink CC13xx in 4mm × 4mm and 5mm × 5mm VQFN Packages

Low power consumption

Wide supply voltage range

Normal Operating Voltage: 1.8V to 3.8V

External Regulator Mode: 1.7V to 1.95V

Active mode RX: 5.9mA

Active mode TX (0dBm): 6.1mA

Active mode TX (+5dBm): 9.1mA

Active mode MCU: 61μA/MHz

Active mode MCU: 48.5 CoreMark/mA

Active Mode Sensor Controller:

0.4mA + 8.2μA/MHz

Standby current: 1.1μA (RTC running, RAM/CPU hold)

Shutdown current: 100nA (wakeup on external event)

Radio Frequency (RF) Section

2.4GHz RF Transceiver Compliant with Bluetooth Low Energy (BLE) 4.2 and 5 Specifications

Excellent receiver sensitivity (–97dBm for BLE), selectivity and blocking performance

102dB (BLE) link budget

Programmable output power up to +5dBm

Single-ended or differential RF interface

For systems that comply with various global RF regulations

ETSI EN 300 328 (Europe)

EN 300 440 Category 2 (Europe)

FCC CFR47 Part 15 (US)

ARIB STD-T66 (Japan)

Tools and Development Environment

Full-featured development kit

for different RF configurations

SmartRF Tool Portfolio

Sensor Controller Studio

IAR Embedded Workbench (for ARM)

Code Composer Studio

CCS Cloud

application

Home and Building Automation

Connected Home Appliances

illumination

Security lock

gateway

security system

industry

logistics

Manufacturing automation

Asset Tracking and Management

HMI and remote display

Access control

retail

beacon

advertise

Electronic Shelf Labels (ESL) and Price Labels

Point of sale and payment systems

Health and Medical

thermometer

SpO2

Blood Glucose and Sphygmomanometers

weighing scale

hearing aid

Sports and Fitness Equipment

Activity monitors and fitness trackers

heart rate monitor

Running and Cycling Sensors

sports watch

gym equipment

Team sports equipment

HID

Voice remote control

game

keyboard and mouse