RX1360 is a step-down constant current driver chip that drives high-brightness LEDs. RX1360 uses very few external components, such as MR16LED lamp cups and LEDs.

Stage lights, car LED lights, solar LED lights and LED street lights provide a very cost-effective solution.

The RX1360 input voltage range is from 5V to 30V, the output current is set by the sampling resistor, and the maximum output current of a single LED can reach 500mA.

The RX1360 adopts the patented constant current control method to make the LED current accuracy up to ±3%.

The RX1360 accepts 0.5-2.5V analog dimming and PWM dimming with a wide frequency range through the DIM pin. When the voltage of DIM is lower than 0.3V, the power switch is turned off, and the RX1360 enters a standby state with extremely low operating current.

The RX1360 has a built-in power switch. Depending on the input voltage, the RX1360 can drive multiple 1-watt or 2-watt LEDs. The RX1360 includes over temperature protection, LED short circuit and open circuit protection functions.

can.

The RX1360 is packaged in a small SOT23-5 package.

RX1360 Features:

Very few external components

Wide input voltage range: from 6V to 30V

±3% output current accuracy

LED open circuit protection

LED short circuit protection

Over temperature protection

Maximum output current of 500mA

Multiplexing DIM pins for LED analog dimming and PWM dimming

Up to 97% efficiency

Output adjustable constant current control method

RX1360 application:

MR16/11 LED spotlights instead of halogen lamps

Car LED Lights

LED Stage Lights

Solar LED Light

LED signal lights

LED street light