The MLX90615 is an Infra Red thermometer for non contact temperature measurements. Both the IR sensitive thermopile detector chip and_the signal conditioning chip are integrated in the same TO-46 can package.

Thanks to its low noise amplifier, 16-bit ADC and_powerful DSP unit, a high accuracy and_resolution of the thermometer is achieved.

The thermometer is factory calibrated with the digital SMBus compatible interface enabled. Readout resolution is 0.02°C.

The MLX90615 is built from 2 chips, the Infra Red thermopile detector and_the signal conditioning chip MLX90325, specially designed by Melexis to process the output of IR sensor.

The device is available in an industry standard TO-46 package.

Thanks to the low noise amplifier, high resolution 16-bit ADC and_powerful DSP unit of the MLX90325, Melexis is able to deliver a high accuracy and_high resolution infrared thermometer. The calculated object and_ambient temperatures are available in the RAM memory of the MLX90325 with a resolution of 0.02°C. The values are accessible by 2 wire serial SMBus compatible protocol with a resolution of 0.02°C or via a 10-bit PWM (Pulse Width Modulated) signal from the device.

The MLX90615 is factory calibrated in standard temperature ranges from: -40...85?C for the ambient temperature and_from -40...115?C for the object temperature.

As a standard, the MLX90615 is delivered with a programmed object emissivity of 1. It can be easily customized by the customer for any other emissivity in the range 0.1...1.0 without the need of recalibration with a black body.

The MLX90615 can be battery powered.

An optical filter (5.5μm …14μm long-wave pass) that cuts off the visible and_near infra-red radiant flux is integrated in the package to make the sensor insensitive to visible light.

Brand:

Melexis

model:

MLX90615, MLX90615SSG-DAA-000-SP, MLX90615SSG-DAA-000-TU, MLX90615SSG-DAG-000-SP, MLX90615SSG-DAG-000-TU

Category:

Sensor, Infra Red Thermometer