SG-8018 Series Crystal Oscillator

SG-8018 Series Crystal Oscillator

Epson's wide temperature range, programmable crystal oscillators (SG-8018 Series Crystal Oscillators) are ideal for a wide range of industrial applications

Epson's SG-8018 series of programmable crystal oscillators have a wide temperature range and are ideal for a wide range of industrial applications. By employing Epson's fractional-N PLL technology, the SG-8018 enables arbitrary frequency setting in the range of 0.67 MHz to 170 MHz with resolution as low as 1 ppm. The SG-8018 series operates from a 1.8 V to 3.3 V power supply and consumes less than 2.7 mA (typ). With a wide temperature range of -40°C to +105°C, the SG-8018 series is ideal for harsh industrial applications.

Depending on ordering requirements, the SG-8018 is accurate to ±50 ppm from -40°C to 105°C and is available in a variety of industry standard packages and standard pinouts. Programmable crystal oscillators enable very short production and prototyping lead times, from a few samples to mass-produced products.

characteristic

Frequency range: 0.67 MHz to 170 MHz

Supply voltage: 1.8V/2.5V/3.0V/3.3V

Stability: ±50 ppm

Wide temperature range: -40°C to +105°C

Function: output enable (OE) or standby (ST)

Reduced lead time for mass production with fractional-N PLL technology

application

Audio/Video

Tests and Instruments

automation

Portable Medical Equipment

Printer/Copier

ATE

elevator

HVAC

Programmable SG-8018 series crystal oscillator is the best choice for high precision clock

In recent years, there has been a growing need for smaller electronics with greater power and functionality in a wider range of environments, including extreme o. factories and factory equipment. Epson crystal oscillator will develop a new SG-8018 series of programmable crystal oscillator series products for the market. There are four types of products: SG-8018CA, SG-8018CB, SG-8018CE, SG-8018CG, and the frequency adjustment accuracy can reach 1ppm. , Compared with components of the same level, the power consumption and frequency stability have been significantly improved. The SG-8018 series products have a wider operating temperature range, in addition to a 2.5mm × 2.0mm package, enabling electronics manufacturers to save board space , the oscillator is also available in the following popular package sizes of 3.2mm x 2.5mm, 5.0mm x 3.2mm and 7.0mm x 5.0mm, users will be able to utilize the SG-Writer II*1 programming tool for SG8108 series and spread spectrum oscillator to program the device.

The power supply voltage of SG-8018 is 1.62V~3.63V, and it supports CMOS level output, which is beneficial to the comprehensive design of the device. Output enable and standby modes are toggled by the OE and ST pins. When the crystal oscillator output frequency is 20MHz, the no-load current loss is as low as 2.7Ma. In standby mode, the quiescent current is only 0.3MUA, which makes it easier to implement low-power designs. The output frequency of the SG-8018 is between 0.67 MHz and 170 MHz. Due to the use of a phase-locked loop (PLL), a stable frequency signal can be generated without temperature compensation, and the frequency tolerance is only (-40~105%).

The unit also has a quick start feature. The crystal oscillator has a start-up time of 3ms, and the rise/fall time of the default mode and fast mode is only 3.0nS. In addition, by choosing SG-Writer II software to realize programmable function, the flexibility of system design has been increased. The working temperature of SG-8018 is -40～105℃, which conforms to the industrial standard. The minimum package size of this series is 2.5mm*2.0mm (SG-8018CG), (miniaturized design for space-sensitive wireless applications), providing accurate clock signals for wireless communication devices, improving service life and durability, and shortening product development cycle.

Epson crystal oscillator agent SG-8018CA, SG-8018CB, SG-8018CE, SG-8018CG series

Contact: Zhong R 13798462534