Low power audio cod...

  • 2022-09-24 22:18:33

Low power audio codec TLV320AIC3100IRHBR new original genuine spot

TLV320AIC3100 Low-Power Audio Codec with Audio Processing and Mono Class-D Amplifier

The TLV320AIC3100 is a low-power, highly-integrated, high-performance codec that provides a stereo audio DAC, a mono audio ADC, and a mono Class-D 4-Ω speaker driver.

The TLV320AIC3100 features a high-performance audio codec with 24-bit stereo playback and mono recording capabilities. The device integrates multiple analog functions such as microphone interface, headphone driver, and speaker driver. The TLV320AIC3100 has a built-in digital audio processing block (PRB) and ADC path for DAC. The digital audio data format is programmable and works with popular audio standard protocols (I2S, left/right justified) in master, slave, DSP and TDM modes. Can support bass boost, treble or equalizer programmable digital signal processing module. The on-chip PLL provides the required high-speed clock digital signal processing blocks. Volume can be controlled by pin control or register control. This audio function uses the I control 2C serial bus. The TLV320AIC3100 features a programmable digital sine wave generator in a 32-pin QFN package.

Features:

Stereo audio DAC with 95 dB SNR

Mono audio ADC with 91 dB SNR

Supports independent DAC and ADC sample rates from 8 kHz to 192 kHz

Mono Class D BTL speaker driver (2.5 W into 4Ω or 1.6 W into 8Ω)

One differential input and three single-ended inputs for mixing and level control

Microphone with Bias, Preamp PGA and AGC

Built-in digital audio processing block (PRB) using user programmable biquad and FIR filters

Digital mixing function

Programmable digital audio processor for bass boost/treble/equalizer, up to five dual diode recordings and up to six dual duets for playback

Pin-controlled or register-controlled volume control settings for digital playback

Digital sine wave generator for beep sound

Integrated PLL audio processor for programmable digital

Full power down control

power supply:

- Analog: 2.7 V-3.6 V.

- Digital core: 1.65 V-1.95 V

- Digital I/O: 1.1 V-3.6 V.

- Class D: 2.7 V-5.5 V (SPKVDD≥AVDD)

5 mm × 5 mm 32-QFN package