TP4101 Tuowei TP 5V 145℃ linear lithium battery charging and discharging protection chip spot imported hot selling advantage product original

TP4101 1000mA/500mA linear lithium battery charging and discharging protection chip

TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4101TP4

describe

TP4100/TP4101 is a complete single-cell lithium-ion battery charge management and discharge protection chip, the first 5V power supply reverse polarity protection, with battery reverse polarity protection, compatible with 3mA-1000mA charging current. Its constant current/constant voltage linear control, thin DFN and TSOT packages and low external component count make it ideal for portable product applications.

External sense resistors and blocking diodes are not required due to the use of an internal PMOSFET architecture, coupled with a reverse charge protection circuit. Thermal feedback automatically adjusts the charge current to limit the die temperature during high power operation or high ambient temperature conditions. The chip has an adaptive function of power supply voltage and power, and can directly draw power from USB or solar energy. The full voltage is fixed at 4.2V, while the charge current can be set externally with a resistor. When the battery reaches 4.2V, the charging current drops to 1/10 of the set value, and the TP4100 will automatically terminate the charging.

The discharge management of TP4100 includes under-voltage protection, over-charge protection, output short-circuit protection, output over-current protection, chip over-temperature protection and delayed self-activation recovery after various protections. Other features include charge current monitor, under-voltage lockout , automatic recharge, and two pins for indicating charge status (TP4101 has one charge indicating status pin). The TP4100 is packaged in an 8-pin DFN3*3 package with a charging current range of 3mA-1000mA. The TP4101 is packaged in a 6-pin TSOT23 with a charging current range of 3mA-600mA.

Features

The first 5V power supply reverse connection protection;

Compatible with programmable charging currents ranging from 3mA to 1000mA;

Lithium battery positive and negative polarity reverse protection;

Trickle-constant current-constant voltage three-stage charging;

·Automatic power supply in charging mode;

4.2V preset charging voltage with an accuracy of ±1%;

The highest input can reach 8V;

20% constant current precharge;

·C/10 charge termination;

·The power supply current in charging standby mode is 80uA,

BAT standby current 4uA in discharge mode;

·Battery 2.6V under-voltage protection shutdown, charging self-recovery;

·Overcharge protection, output short circuit protection, output overcurrent protection;

·After protection, self-recovery after 8 seconds;

·Two thin packages are available DFN3*3-8/TSOT23-6.

Absolute Maximum Ratings

·Input power supply voltage (VCC): -5.5V～9V ·PROG: -0.3V～V CC +0.3V

BAT: -4.2V～9V

·CHRG: -0.3V～9V

BAT short circuit duration: continuous

·BAT pin current: 1200mA

·PROG pin current: 1500uA

·Maximum junction temperature: 145℃

·Working environment temperature range: -40℃～85℃

·Storage temperature range: -65℃～125℃

·Pin temperature (soldering time 10 seconds): 260℃

application

·Micro lithium battery equipment

· Wearable, highly integrated lithium battery equipment · Lithium battery portable equipment, etc.

typical application

Precautions for TP4100/TP4101 Test Use

1. In order to ensure reliable use in various situations and prevent chip damage caused by spikes and glitches, it is recommended that 10uF ceramic capacitors and 0.1uF ceramic capacitors be used for Vcc and BAT in TP4100/TP4101 applications. All capacitors must be located close to the chip lead. The feet should not be placed too far. In the application of reverse power supply protection environment, it is required to use an application circuit with dissipation resistance and increase the input capacitance.

2. If you need to test the charging current of TP4100/TP4101, the BAT terminal of the chip should be directly connected to the positive pole of the battery, and the ammeter cannot be connected in series. The ammeter can be connected to the Vcc terminal of the chip.

Hong Kong Xinrui guarantees original imported spot

Xinrui Electronics (Hong Kong) Co., Ltd., a professional component distributor (authorized and non-authorized brands) for 18 years, one-stop terminal manufacturer supporting: (quality assurance and integrity management) is the company's commitment to provide customers with brand original semiconductors, electronic products Component terminal supporting market, focusing on ESD/TVS electrostatic protection diodes, LDO low-power voltage regulators, MOS tubes, battery charging and management power supplies, LEDs, optocouplers, resistors and capacitors, PCB solutions (wireless Bluetooth solutions, One-stop Bluetooth sports solution, speaker, wireless power bank).

Main products: ESD electrostatic diodes, TVS diodes, battery charging and management power supplies, MOS tubes, LDO low-power voltage regulators.

Company: Xinrui Electronics (Hong Kong) Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com

Part of the company's stock:

TLV70433DBVR、TP4101、TP5100、TP4056、RT9013-33PB、TPS73618DBVR、MIC5255-3.0YM5、CDSOT23-T36C、CDSOT23-24C、TL431CDBZR、TL431IDBZR、TLV1117CDCYR、LM317EMPX、NCP1117ST33T3G、NCP1117ST50T3G、PESD5V0V1BL、PESD5V0V1BSF、PESD2CAN、PESD5V0S1BA、PESD12VS2UT、PESD15VL2BT , PESD36VS2UT, PESD3V3L1BA, PESD24VL2BT, IP4220CZ6, IP4223CZ6, BCP56-16, BCP51-16, BSN20, uClamp0511T.TCT, SRV05-4.TCT, RCLAMP0531T.TCT, RCLAMP0502A.TCT, SD05C.TCT, SRAMP05.TCT 、ESD5Z2.5T1G、ESD5Z3.3T1G、CM1213A-01SO、CM1213A-04SO、NTR4501NT1G、NTR4502PT1G、NTR4170NT1G、NTR4171PT1G、RLST23A032C、RLST23A0122C、RLST23A052C、PRTR5V0U2X、GBLC03CI-LF-T7、GBLC03C-LF-T7、GBLC05CI-LF-T7 , GBLC05C-LF-T7, GBLC08CI-LF-T7, GBLC08C-LF-T7, GBLC12CI-LF-T7, GBLC12C-LF-T7, GBLC15CI-LF-T7, GBLC24CI-LF-T7, GBLC24C-LF-T7, PSD03C -LF-T7, PSD05-LF-T7, PSD05C-LF-T7, PSD08C-LF-T7, PSM712-LF-T7, AO3400, AO3400A, AO3401A, AO3402, TPSMB6.8CA-E3/52, TPSMB6.8A, TPSMB47A , TPSMB43A, TPSMB39A, TPSMB36A, TPSMB33A, TPSMB30A, STTH208, etc.

For more models, please inquire:

Xinrui Electronics (Hong Kong) is a professional supplier of integrated circuits and has many years of sales experience in our bank!

With a large stock of stock, integrity-based, customer first, the quality of products for customers!

Due to the large number of company models, it is impossible to upload them one by one. If you can't find the product you want on the website, please contact the salesperson. Our company can provide electronic components distribution service.

Company: Xinrui Electronics (Hong Kong) Co., Ltd.

Contact: Miss Yao

Mobile: 13725590222

Tel: 0755-83780666/83265111

Fax: 0755-82800889

QQ: 3373563833

Address: 26B, Block B, Huaqiang Plaza, Futian North Road, Futian District, Shenzhen

Company website: www.xrdz-hk.com

Hong Kong Xinrui guarantees original imported spot

According to unidentified sources in the Nikkan Kogyo Shimbun, Panasonic is arranging with Tesla to supply lithium-ion batteries from its Gigafactory in Nevada, U.S., to Tesla's Shanghai plant.

So far, Panasonic has fully supplied batteries for Tesla, which is expected to be risky if other companies step in; Panasonic aims to use existing Gigafactory factories to reduce the new investment required.

Tesla has not specified the battery supplier for the Shanghai plant and will seek multiple suppliers. Once production at the Shanghai plant is on track, Panasonic plans to switch to producing batteries locally.

Tesla and Panasonic may need approval from the U.S. government to export batteries to China.

On January 8, Tesla's first overseas factory officially started construction in Shanghai.

While accelerating the pace of going global, Skyworth and other TV manufacturers have also continued to encounter cross-border impacts from Internet companies in recent years. The average price of TV products has continued to decline, and the homogeneity has become increasingly serious.

Wang Zhiguo believes that one of the reasons for the emergence of cross-border challengers in the industry is that there is no threshold in the TV supply chain. Skyworth will provide global customers with large-screen AIOT intelligent solutions.