4N35 Basic Information: General Purpose 6-PIN Phototransistor Coupler

Number of channels: 1

Output voltage: 30V

Number of pins: 6

Device marking: 4N35

External depth: 6.4mm

External length/height: 3.55mm

Package Type: DIP

Operating temperature range: -55°C to +100°C

Pin Section: 2.54mm

Approved by: CSA

Row spacing: 8.2m

Maximum forward current, If:60mA

Forward voltage Vf max: 1.5V

Voltage, Vceo: 30V

Voltage, Vf typical: 1.3V

Maximum output voltage: 30V

Minimum breakdown voltage: 30V

Current Transfer Rate (CTR) Min: 100%_

4N35 main parameters:

Input Type: DC

Output Type: Transistor with Base

Output current/channel: 100 mA

CTR (MIN) :100%_@10mA

4N35 package information:

4N35 Type: DIP

4N35 pins: 6

4N35 Packaging Specifications

Type: Tube (Tube)

Per tube: 50 pcs

Total: 20 tubes; 1,000 pcs

Are you looking for: 4n35 pin description, 4n25 pin diagram and parameters, 4n35 Chinese information, 4n25 optocoupler parameters, 6-pin optocoupler circuit diagram, 4n25 working principle

4N35 related knowledge: Optical coupler equipment (OCEP) is also called opto-isolator or opto-coupler, referred to as opto-coupler. It is a device that transmits electrical signals with light as a medium, usually encapsulating the emitter (infrared light-emitting diode LED) and the light receiver (photosensitive semiconductor tube, photoresistor) in the same tube. When the input terminal is powered on, the light emitter emits light, and the light receiver generates a photocurrent after receiving the light, which flows out from the output terminal, thus realizing the "electricity-optical-electricity" conversion. The optocoupler, which couples the input signal to the output with light as the medium, has the advantages of small size, long life, no contact, strong anti-interference ability, isolation between output and input, and one-way signal transmission. Wide range of applications in the circuit.