InfiniBand +12 V Power and +5 V Auxiliary Bulk Power Controller The ISL6160 is uniquely designed to address the requirements of the InfiniBand (IB) industry initiative while providing VB (bulk) independent power control (+12 V) and VA State (auxiliary) (+5 V) power rail single port. The device can implement applications in both Societe Generale Class I (non-isolated) and Class II (isolated) power topologies. The ISL6160, along with an N-channel power MOSFET and a minimum number of passive components provide a soft voltage ramp start module for both VB and VA. It also provides accurate and consistent current for a period of time before the regulated output latches off in the presence of overcurrent (OC) conditions. In addition, the ISL6160 provides an enable signal for the DC-DC converter on the module either when the module is plugged into the slave chassis or upon a wake-up event request.

Features • VB's programmable overcurrent protection for 25W and 50W class ports • Internal charge pump allows an N-channel VB control using a MOSFET • VB's adjustable turn-on ramp • Turn-on overcurrent protection during soft-start • Two VB's Over-current detection and protection levels • VA and VB under-voltage shutdown • 0.125Ω integrated power N-channel MOSFET switch VA • Accurate current detection and limit VA (1A) bars • Timed current regulation period (VB optional )
• VA ramp control on • 1µs short response time VB secondary iron dead • Lead-free available

Applications • VB and VA InfiniBand Voltage Control • -48V and 5V Telecom