Features • Three half bridges • Optimized management of DC motors for applications • Delivers up to 0.6 A continuous, 1.2 A peak current • RDS author; typical. 0.8Ω, @ 25°C between each switch • Outputs: short circuit protection and diagnostics • Superheater, hysteresis protection and diagnostics • Standard SPI-Interface/Daisy chain capability • Very low current consumption in standby (disable) mode (typ. 10µA power supply and 2µA logic supply, @25°C)
• Overvoltage and Undervoltage Lockout • CMOS/TTL Compatible Input Hysteresis • No Crossover Current • Internal Clamping Diode • Enhanced Power P-DSO Package • Programming Compatible with TLE 5208-6G

Functional Description The TLE 6208-3G is a fully protected three-layer half-bridge driver designed for automotive and industrial motion control applications. The device is based on Siemens Power Technology Standard Penetration Test® allowing bipolar and CMOS control circuits to exist in the same monolithic circuit as DMOS power devices. In motion control 2 actuators (DC motors) can be connected to 3 halfbridgeoutputs (cascade configuration). Operating modes forward (clockwise), reverse (counterclockwise), brake and high impedance control from a standard SPI interface. The possibility to control the output from the central logic via software allows to limit the power consumption. So the standard P-DSO-14 package meets application requirements and saves PCB, board space and cost. In addition, the built-in features such as overvoltage and undervoltage lockout, thermal protection and very low quiescent current in standby mode are widely used in automotive and industrial applications.