-
2022-09-24 23:33:15
X9015 - Low Noise, Low Power Volatility
Intersil's X9015 is a 32-tap potentiometer that is variable. The device consists of a 31 resistor that can be programmed in series to connect any RW/VW wiper output node between the connection resistors. The point where the wipers are connected is conveyed by information to the device on the 3-wire port. The 3-wire port changes the tap position on the falling edge of the incremental pin. The wiper action is determined by the direction of the up/down pin state. Power tap location click #15. The X9015 can be used in a wide variety of applications that require a digitally controlled variable resistor to set the analog value.
Features • 32 taps • Up/Down 3-wire serial interface • VCC = 2.7V- 5V
• Work at ICC=50µA max.
• Standby current = 1μA or less.
•RTOTAL=10KΩ, 50KΩ, 100KΩ
• Package using SOIC-8, MSOP-8
• Lead-free plus annealed (RoHS compliant)