Product Details

describe:

The PCM6020-Q1 is a 2-channel high-performance audio analog-to-digital converter (ADC) that supports analog input signals up to 10 V RMS. The PCM6020-Q1 supports line and microphone inputs, and supports single-ended and differential input configurations. The device offers integrated high-voltage, programmable microphone bias and input diagnostic circuitry, allowing direct connection to microphone-based automotive systems, and full troubleshooting capabilities for direct-coupled inputs. The PCM6020-Q1 integrates a high-efficiency boost converter to generate high-voltage microphone bias using an external low-voltage 3.3V supply, which is readily available in the system to generate high-voltage, programmable microphone bias. The PCM6020-Q1 integrates programmable channel gain, digital volume control, low jitter phase locked loop (PLL), programmable high pass filter (HPF), A3984SLPTR-T biquad filter, low latency filter mode, and allows up to 768 kHz sample rate. The PCM6020-Q1 supports Time Division Multiplexing (TDM), I2S or Left Justified (LJ) audio formats and can be controlled via an I2C or SPI interface. These integrated high-performance features and 3.3V single-supply operation make the PCM6020-Q1 device and PCM6xx0-Q1 device family an excellent choice for scalable, space-constrained automotive systems.

characteristic:

●AEC-Q100 qualified for automotive applications

—Temperature Class 1: –40°C ≤ TA ≤ +125°C

●ADC performance:

— Line differential input dynamic range: 110 dB

— Microphone differential input dynamic range: 110 dB

—THD +N: –94 dB

- Channel summation mode supports high signal-to-noise ratio

●ADC input voltage:

— Differential 10V RMS full-scale input

—Single- ended 5V RMS full-scale input

ADC sampling rate (f S ) = 8 kHz to 768 kHz

●Programmable channel settings:

— Channel Gain: 0 dB to 42 dB in 1-dB steps

—Digital volume control: –100 dB to 27 dB

—Gain calibration with 0.1-dB resolution

— Phase calibration with 163 ns resolution

●Programmable microphone bias (5 V to 9 V):

— Integrated high-efficiency boost converter

●Programmable microphone input troubleshooting:

—Open input or shorted input

- Short to ground, MICBIAS or VBAT

—Microphone bias overcurrent protection

●Low latency signal processing filter selection

●Programmable HPF and biquad digital filter

●I 2 C or SPI control

●Audio serial data interface:

—Format : TDM, I2S or Left Justified (LJ)

- Word length: 16-bit, 20-bit, 24-bit or 32-bit

- Master or Slave

●Single power supply, 3.3V operation

●I/O power operation: 3.3 V or 1.8 V

●Energy consumption:

— < 21.5 mW/channel, 48-kHz

parameter:

Number of ADC channels: 2

Analog Inputs: 2

Digital audio interface: I2S, L, TDM

Control interface: I2C, SPI

Sampling Rate (Max) (kHz): 768

ADC SNR (typ) (dB): 110

Approximate Price (USD): 1 Library | 3.828