Product Details

describe:

The AMC1306 is a precision delta-sigma (ΔΣ) modulator whose output is separated from the input circuit by a capacitive double isolation barrier that is highly resistant to magnetic interference. The barrier is certified to provide reinforced isolation up to 7000 V peak according to DIN VDE V 0884-11 and UL1577. Used in conjunction with an isolated power supply, this isolated modulator separates parts of the system that operate at different common-mode voltage levels and protects low-voltage parts from damage.

The input of the AMC1306 is optimized for direct connection to shunt resistors or other low voltage level signal sources. The ±50mV device's unique low input voltage range allows significant power reduction through shunts and supports excellent AC and DC performance. The output bitstream of the AMC1306 is Manchester encoded (AMC1306Ex) or unencoded (AMC1306Mx), depending on the derivative. By using an integrated digital filter such as TMS320F2807x or TMS320F2837 model">TMS320F2837 model">TMS320F2837 model">TMS320F2837 model">TMS320F2837 model">TMS320F2837 model">TMS320F2837 model">TMS320F2837 model">TMS320F2837 model">TMS320F2837 model The ADV7520NKBBCZ-80 filter in the series) to decimate the bit stream, the device can achieve 16-bit resolution and 85 dB dynamic range at a data rate of 78 kSPS.

The bitstream output of the Manchester-encoded AMC1306Ex version supports single-wire data and clock transfer regardless of the setup and hold time requirements of the receiving device.

characteristic:

●A pin-compatible family optimized for shunt-based current measurement:

○±50-mV or ±250-mV input voltage range

○ Manchester encoded or unencoded bitstream option

●Excellent DC performance:

○Offset error: ±50 μV or ±100 μV (max)

○Offset drift: 1 μV/°C (max)

○Gain error: ±0.2% (maximum)

○ Gain drift: ±40 ppm/°C (max)

●Transient immunity: 100 kV/μs (typ.)

●System-level diagnostic function

●Security related certification:

○Conform to DIN VDE V 0884-11: 2017-01 model">2017-01 model">2017-01 model">2017-01 model">2017-01 model">2017-01 model">2017-01 model" >2017-01 Model >2017-01 Model >2017-01 7000-V PEAK Reinforced Isolation

○ 5000-V RMS isolation for 1 minute, conforms to UL1577

○CAN/CSA No. 5A Component Acceptance Service Notice and IEC 62368-1 End Equipment Standard

Fully specified over the extended industrial temperature range: –40°C to +125°C

parameter:

Input range (Vp-p): 250mV

Interface Type: Serial CMOS

Sample Rate (Max) (MSPS): 21

Isolation (kV peak): 7

CMTI (minimum) (kV/μs): 50

Number of input channels: 1

Architecture: Delta-Sigma

Signal-to-noise ratio (dB): 82

Operating Temperature Range (°C): -40 to 125

INL (max) (+/-LSB): 4

Power consumption (typ.) (mW): 42.4