EPSON has recently launched two multi-functional continuous ink supply business models, EPSON L3110 and L3150, in its own continuous ink supply product line. The main functions are to provide A4 size printing, photocopying and scanning functions. Four-color separation continuous ink supply design, according to the official specifications, only one set of ink can reach 4,500 black and 7,500 color documents. After converting to the cost of a single ink, printing a single black document is about 0.07 yuan, And printing a single color file is about 0.19 yuan, providing a more economical choice of printers for small commercial environments. In addition, EPSON for these two continuous ink supply machines not only provides home delivery, but also can extend the warranty service to 2 years or 30,000 sheets by purchasing an additional set of ink.

●EPSON L3110 Multifunctional Continuous Ink Supply Machine Unpacking and Specifications

The main difference between EPSON L3110 and L3150 two multi-functional continuous ink supply business machines is the presence or absence of WiFi wireless network function, and this time I want to try the more entry-level EPSON L3110.

It can be seen from the outer box that the EPSON L3110 multi-functional continuous ink supply business machine is equipped with the filling ink of model 003, and a single set of standard capacity ink can reach the printing volume of 4500 black sheets and 7500 color sheets. In addition, the table on the left also indicates that the printing speed of this business machine can reach 33 black or 15 color per minute, and has 5760x1440dpi printing resolution and 600x1200dpi scanning resolution support.

Open the top cover of the outer box, you can see the main body of the business machine packaged with Styrofoam and some accompanying accessories.

The accessories included in the package are mainly paper manual, driver software CD, USB transmission cable, figure 8 power cable and a set of full capacity 003 filling ink.

EPSON L3110 three-in-one continuous ink supply MFP can provide printing, photocopying and scanning functions, and the printing specifications are AQY210HL model">AQY210HL model">AQY210HL model">AQY210HL model">AQY210HL model">AQY210HL model">AQY210HL model ">AQY210HL model">AQY210HL model">AQY210HL model">AQY210HL micro-needle dot piezoelectric inkjet technology, and has 180-hole black nozzle and 177-hole color nozzle (blue, red, yellow three colors have 59 holes respectively ), the minimum ink drop volume can reach 3pl, and can provide 5760x1440 printing resolution. As for the printing speed, the fastest printing speed in draft mode can reach 33 black and 15 color per minute. Achieve a print speed performance of 10 black or 5 color per minute.

This 3-in-1 MFP is equipped with an A4 flatbed scanner that can support up to 600dpi resolution. According to the official specification sheet, this MFP takes about 11 seconds to scan a single page of black and white documents, while scanning The time for a single-page color document is about 32 seconds.

This copier is a relatively entry-level model, so the control panel on the fuselage only has the power switch, photocopying and function setting shortcut keys and status indicators.

The paper feed slot of the fuselage is designed at the rear of the fuselage, and it adopts a retractable storage design, and the space can hold about 100 sheets of A4 size paper.

The position of the paper output table is in the front of the fuselage, and it is also a retractable design. When not in use, the platform can be retracted to save space.

This EPSON composite machine adopts the design of CMYK four-color separation ink tank, and the remaining amount of ink can be directly seen outside the fuselage.

After opening the cover of the ink tank, you can see that each color of the ink filling hole has a clear sticker mark and an anti-exposed safety cover.

When actually filling ink, each ink hole adopts a special card slot design, and the matching original ink tank also has a leak-proof design, so when filling ink, just insert the ink tank of each color into each card slot. The ink will start to fill, so don't worry about dripping all over the place when you fill it up.

On the back of the fuselage, you can see that the power connector of this three-in-one composite machine is designed with a figure-8 specification.

Since this 3-in-1 MFP does not provide network connection specifications, it can only connect to the computer through the USB port.

There is also a waste ink collection box at the rear of the fuselage. When the collection ink box is full, you can also purchase accessories to replace it yourself.

●EPSON L3110 multi-function continuous ink supply business machine printing speed and quality test

After briefly reading the unpacking and specification introduction of this business machine, then fill in the ink one by one to try it out!

First, simply test the printing speed performance of this business machine. When actually connecting a computer with a USB cable and printing a 19-page PDF color document, after pressing the button to start printing, it took about 22 seconds for the first document to be printed, and the entire document was printed in a total of 22 seconds. About 6 minutes and 10 seconds. Then test the speed performance of printing photos, it takes about two minutes from the start of pressing to the completion of printing.

As far as the entry-level inkjet models are concerned, the files actually printed by this continuous ink supply business machine can be seen to have some burrs on the edges, and the print quality and sharpness performance are average.

The picture below is the document after scanning the actual printed document through the fuselage, for your reference.

The print quality of photos is a little better than expected, especially photos with blue sky will appear more saturated and rich.

However, for the part of the person's photo, the actual printed photo will be a little more yellow-red.

The photos below are also scanned through the fuselage, for your reference.

As a final reminder, the ink matched with this business machine does not have a waterproof function, so when the document gets wet, you can see that black and color text or pictures will be blurred.

●Trial summary

EPSON L3110 and L3150, two entry-level multi-function continuous ink supply machines, are currently priced at NT$ 4490 -ic/" title="4490 model">4490-ic/" title="4490 model"> 4490-ic/" title="Model 4490">4490-ic/" title="Model 4490">4490-ic/" title="Model 4490">4490-ic/" title="Model 4490">4490- ic/" title="4490 model">4490-ic/" title="4490 model">4490-ic/" title="4490 model">4490 and 5490 yuan, although the two business machines provide too many additional functions, However, it is quite enough for only printing, photocopying or scanning needs, and its continuous ink supply design, plus a complete set of inks already included in the package, can provide 4500 black and 7500 color prints. As far as the overall printing cost is concerned, it will indeed save a little more than the general inkjet business models. I believe that for a small business environment with a monthly printing volume of about 100 sheets and a limited budget, this EPSON L3110 should be quite economical. Choose, if you have WiFi connection requirements, you can choose L3150 will be more suitable.