Product Details

describe:

The TMP435 is a remote temperature sensor monitor with built-in local temperature sensor. AOZ1024DI Remote Temperature Sensor Diode Connected Transistors are typically low cost NPN or PNP type transistors or diodes that are part of a microcontroller, microprocessor or FPGA.

Multiple IC manufacturers have remote accuracy of ±1°C without calibration. The two-wire serial interface accepts SMBus Write Byte, Read Byte, Send Byte and Receive Byte commands to program alarm thresholds and read temperature data.

TMP435 includes beta compensation (correction), series resistance cancellation, programmable non-ideality factor, programmable resolution, programmable threshold limits, min and max temperature monitors, wide remote temperature measurement range (up to +150°C), diode fault Detection, temperature alarm functions, and pin-programmable two-wire addressing using tri-state logic.

The TMP435 is available in an MSOP-10 package.

characteristic:

●±1°C remote diode sensor

●±1°C local temperature sensor

●Auto BETA compensation

n-factor correction

● Programmable threshold

●Two-wire/SMBus serial interface

● Minimum and maximum temperature monitor

●Multiple interface addresses

● ALERT/THERM2 pin configuration

● Diode fault detection

●Pin programmable two-wire addressing

●Apply

○LCD/DLP/LCOS projector

○Server

○Industrial Controller

○ Central office telecommunication equipment

○Desktops and Laptops

○ Storage Area Network (SAN)

○Industrial and medical equipment

○Processor/FPGA temperature monitoring

DLP is a registered trademark of Texas Instruments.

SMBus is a trademark of Intel Corporation.

parameter:

Local Sensor Accuracy (Max) (+/- C): 1

Type: remote

Operating temperature range (°C): -40 to 125

Power supply voltage (Min) (V): 2.7

Interface type: I2C, SMBus

Power supply voltage (Max) (V): 5.5

Supply Current (Max) (uA): 45

Temperature Resolution (Max) (Bits): 12

Features: One-click conversion, ALERT

Remote channel (#): 1

Address: 9