Notebook computers have become one of the must-have tools for many people who go out frequently. However, even if the notebook computer is designed to be thin and portable, it seems that there is still no need for the pen to face the discomfort caused by long-term tapping on the keyboard. With the improvement in the structure of the electric body, many users need to purchase additional peripheral accessories such as a laptop stand, so that the laptop can still be ergonomically comfortable when using the laptop for a long time. The MOFT laptop invisible stand, which has been well received on fundraising platforms recently, has a lightweight design with a thickness of 3mm, a weight of 89g, a maximum weight of 8Kg, and a repeatable non-marking adhesive, which is supported by many consumers. And love, this article will share with you the actual experience of this MOFT laptop invisible bracket.

The invisible stand of MOFT laptop is made of recyclable paper. Since the product body is quite light, the packaging is also relatively light, but it is prone to pressure loss when it is full. Please be careful when storing it after purchase. The front and back of the packaging The functional features of the product are printed, including two support angles, easy installation, etc.

Outer packaging

Features

The package contains the MOFT laptop invisible stand body, the instruction manual and the MOFT brand screen wiper. When using this product for the first time, Xiaobian recommends reading the instruction manual carefully to avoid any inconvenience in use. The repeatedly pasted screen wiper can be pasted on the back of the phone, making it easy to remove and wipe the screen.

The size of the product body is 22.4 cm x 17 cm, and it is suitable for AOD2610 notebook computers or tablet computers of 11~15.6 inches. This time I borrowed a silver color scheme. MOFT also launched rose gold, space gray, gold and gray. The black universal version, and even a special style cooperating with the well-known illustrator Malayan Tapir, can be viewed on the fundraising platform if you are interested.

The back of the main body has a non-marking adhesive configuration. In addition, the bottom is also made of non-slip rubber material. The non-marking adhesive can be used repeatedly. As long as there is not too much dust on the adhesive, the adhesive performance can be maintained at a certain level. .

product body

non-marking adhesive

The installation method of the MOFT invisible bracket is quite simple. Just remove the plastic film on the non-marking adhesive and stick it on the center of the bottom cover of the notebook. The editor here uses a new version of MacBook Air. To demonstrate, at the same time, pay attention not to stick to the position of the fuselage shaft, otherwise it will affect the opening of the laptop cover. After pasting, you can see that there will be a thickness of 3mm on the bottom cover of the fuselage, which will have a heightening effect during normal use, but there will also be shaking.

Paste Demonstration

Thickness after pasting

, In addition, many friends have responded that they can launch invisible brackets with heat dissipation function. MOFT also seems to have launched a general-purpose version. The non-slip pad is not a sticky type. You can also refer to it.

Here, let's take a look at the height comparison before and after installing the MOFT invisible bracket for laptops. Basically, after installing this bracket, the original laptop bag and laptop bag can be used normally, and there is no need to replace it. The height after installation Although there is a little improvement, it really doesn't have much impact on actual use, except for a little shaking when laying flat.

Mounting height

height comparison

In addition to the MacBook Air, the editor also installed the MOFT invisible bracket on the MacBook Pro Retina 15, mainly to test the stability of the actual use, by the way, let you take a look at the two-stage height adjustment, the higher 25 degrees The angle will increase the height of the back side of the laptop by about 8cm. According to the official website, it is suitable for watching movies or browsing the web. As for the lower 15-degree angle, it is more suitable for daily keyboard use.

normal use height

25 degree angle

15 degree angle

From the back side of the laptop, the state of the two different angles is actually installed on the MBPR 15. If the keyboard is not pressed too hard, there will be basically no shaking, and the editor thinks that the heat dissipation performance is also good. With the improvement, there will be no overheating of the laptop before, especially when using for photo editing, video conversion, etc.

25 degree angle back

15 degree angle back

Here is also a demonstration video of the actual use of the MOFT laptop invisible bracket. Whether it is opening or adjusting the angle, it is quite simple, but it takes more practice to make it easier for you to refer to!

After the actual use, the editor believes that whether it is used at an angle of 25 degrees or 15 degrees, it can meet the situation of using the keyboard for a long time, and it is very helpful for the improvement of comfort. , depending on the sitting posture of the individual, the applicable situation provided by the official can be used for reference but does not need to stick to the rules. However, if you have friends who are accustomed to using external transmission devices, you have to endure the state of the device being placed vertically, which is acceptable to me.

normal use situation

25 degree angle use situation

15 degree angle use situation

The MOFT laptop invisible stand is also suitable for use when there is no desktop available, but I recommend using it at a 15-degree angle. After all, the legs are not like the desktop, which is a full-plane environment. If the angle is too high, it will appear. In the case of shaking, in this case, the high temperature generated by the bottom cover during heat dissipation can be avoided, which I think is a very practical design.

Overall, this MOFT laptop invisible stand can give users a more comfortable environment for using laptops without affecting the original structure of the laptop. For readers, it is really a very good choice, and the design that is convenient to carry and does not take up space is also quite in line with the needs of actual use. As for the part that affects the heat dissipation, the editor himself thinks that the effect is really not big when using it. If it really affects the heat dissipation, MOFT also provides a general heat dissipation version that can be purchased.

There are two height options plus 8KG bearing weight. I have tried MacBook Air and MacBook Pro Retina 15. There is no big problem in actual use stability. If the large-sized laptop will shake, It is suggested that you can re-paste or adjust the way you usually use the laptop keyboard, and there may be improvements.