TAJD475K050RNJ_TAJD475K050RNJ Introduction

However, when connecting directly from NMOS to CMOS, since the high level of the NMOS output is lower than the input high level of the CMOS integrated circuit, a (potential) pull-up resistor R needs to be used, and the value of R is generally 2 to 100KΩ. As long as the CMOS integrated circuit uses the same power supply as the NMOS integrated circuit, it can be directly connected to the NMOS integrated circuit. Most NMOS integrated circuits are powered by a single group of positive power supplies, and most of them are 5V.

TAJD475K050RNJ_TAJD475K050RNJ

TAJB156K010RNJ

TAJA225M010RNJ TAJA225M016RNJ TAJA225M020RNJ TAJA225M025RNJ TAJA225M035RNJ TAJA226K004RNJ TAJA226K006RNJ TAJA226K010RNJ TAJA226M004RNJ TAJA226M006RNJ .

AO4832 AO4838 CEM3138 DMG4800LSD-13 EMB17A03G FDS6982-NL.

Some MOSFETs will have a diode inside, which is a body diode, or a parasitic diode or a freewheeling diode.

TPC8223-H UPA2750GR 4936 9936 4228GM.

TAJD475K050RNJ_TAJD475K050RNJ

TAJA684M025RNJ

When the G terminal is at a low level, the D and S cannot be turned on, and the motor cannot run. . N-type MOS tube has more application scenarios. Compared with P-type MOS tube, its advantages are as follows: 1. Faster switching speed 2. Higher withstand voltage 3. Larger current passing through. The following is a simple example of N-type MOS tube. The reference circuit of , when the G terminal is connected to a high level, the MOS tube D and S are turned on, at this time the MOS tube is turned on, the current of the motor can pass, and the motor rotates.

The source S of the P channel is connected to the input, the drain D is connected to the output, and the N channel is the opposite.

BYJ337 BYN3324 BYG3333 BYN3330 BYS3312.

051N15N5MOS 052N06L 053P04-518 054NE8N 057N06N.

TAJD475K050RNJ_TAJD475K050RNJ

NCE2302D NCE2302F NCE1012E NCE2302B NCE2302.

relevant information