TAJD156M035RNJ_TAJD156M035RNJ Introduction

So the stability of the tube is inseparable from the manufacturing process, and poor workmanship may result in the inconsistency of the parameters of these small tubes. Their various switching actions are almost the same. Of course, when they burn out, there must be a small tube that can't bear it first.

TAJD156M035RNJ_TAJD156M035RNJ

TAJD476K035RNJ

TAJA226M010RNJ TAJA226M016RNJ TAJA334K035RNJ TAJA334K050RNJ TAJA334M035RNJ TAJA334M050RNJ TAJA335K006RNJ TAJA335K010RNJ TAJA335K016RNJ TAJA335K020RNJ .

040N06N 042N03L 042N03MS 043N03MS 045N10N.

TPC8223-H UPA2750GR 4936 9936 4228GM.

For the P-type MOS tube, if the voltage of S is higher than that of G (there is a voltage difference between G and S, the specific level depends on the specific MOS tube), the connection between D and S will be conducted (the voltage direction S points to D), this At this time, the gap between D and S is equivalent to a very small resistance. If the gap between G and S is low (the specific level depends on the specific MOS tube), the gap between D and S will be cut off. At this time, the gap between D and S is equivalent to a very small resistor. If the resistance is too large, current cannot flow.

TAJD156M035RNJ_TAJD156M035RNJ

TAJC157K010RNJ

BYP336 BYT337 BYS334 BYS345 BYP346.

060322R5%_0603270K5%_0603270R5%_060327K5%_0603330R5%_.

BYI3245 BYN3226 BYN3232 BYS326 BYD32515Z.

BYP32028 BYS32010 BYJ32027A BYH326 BYH323.

TAJD156M035RNJ_TAJD156M035RNJ

NCE20ND06 NCE2008N NCE2312 NCE2312A NCE8205A.

relevant information