TAJD107K006RNJ_TAJD107K006RNJ Introduction

So the stability of the tube is inseparable from the manufacturing process, and poor workmanship may result in the inconsistency of the parameters of these small tubes. Their various switching actions are almost the same. Of course, when they burn out, there must be a small tube that can't bear it first.

TAJD107K006RNJ_TAJD107K006RNJ

TAJB336M006RNJ

BYP35066A BYP35014A BYF35526A BYP36078A BYI362.

TAJA226M010RNJ TAJA226M016RNJ TAJA334K035RNJ TAJA334K050RNJ TAJA334M035RNJ TAJA334M050RNJ TAJA335K006RNJ TAJA335K010RNJ TAJA335K016RNJ TAJA335K020RNJ .

TPC8223-H UPA2750GR 4936 9936 4228GM.

FDS6990-NL HAT2092R HAT2092RJ IRF8313TRPBF MDS5601URH.

TAJD107K006RNJ_TAJD107K006RNJ

TAJE157K010RNJ

1. The P-channel mos tube is used as a switch, and the gate-source threshold is -0.4V. When the gate-source voltage difference is -0.4V, DS will be turned on. If S is 2.8V and G is 1.8V, then GS =-1V, the mos tube is turned on, D is 2.8V If S is 2.8V, G is 2.8V, VGSw then the mos tube is not turned on, D is 0V, so if 2.8V is connected to S, the mos tube must be turned on Power is supplied to the system, which is connected to D and controlled with G.

051N15N5MOS 052N06L 053P04-518 054NE8N 057N06N.

BYJ337 BYN3324 BYG3333 BYN3330 BYS3312.

Let’s talk about the characteristics of MOS/CMOS integrated circuits first: the manufacturing process is relatively simple, the yield is high, the power consumption is low, the logic circuit is relatively simple, the integration degree is high, and the anti-interference ability is strong, especially suitable for large-scale integrated circuits. .

TAJD107K006RNJ_TAJD107K006RNJ

NCE30TD120UT NCE40TD120UT NCE40TD120VT NCE30TD120BP NCE25TD120BT.

relevant information