Scalable System Basis Chip Family

Product range, including various products for complete scalable applications

cover.

Dedicated data sheets are available for different product variants The entire range is fully compatible (hardware and software)

TLE9263 with 2 LIN transceivers, 3 voltage regulators

TLE9262 with 1 LIN transceiver, 3 voltage regulators

TLE9261 without LIN transceiver, 3 regulators

TLE9260 without LIN transceiver, 2 regulators

Part Numbers for 5V (TLE926xQX) and 3.3V (TLE926xQXV33) Output Voltages for Main Regulators

CAN Section Network Variants for 5V (TLE926x-3QX) and 3.3V (TLE926x-3QXV33) Output Voltages

Device Description

The TLE9263QX is a monolithic integrated circuit in an exposed pad VQFN-48 (7mm x 7mm) power package with

The Lead Tip Inspection (LTI) feature supports Automatic Optical Inspection (AOI).

The device is designed for use in various CAN-LIN automotive applications as a microcontroller and

As an interface to LIN and CAN bus networks.

To support these applications, the System Basis Chip (SBC) provides key functions such as a 5V low dropout regulator (LDO) for microcontroller power supply, another 5V low dropout regulator with

Off-board protection, such as sensor supply, another 5V/3.3V regulator to drive an external PNP transistor, which

Can be used as a standalone power supply for off-board use, or in a load-sharing configuration with the main regulator

VCC1, HS-CAN transceiver, supports CAN FD and LIN transceivers for data transfer, high-side switch

Features embedded protection and a 16-bit Serial Peripheral Interface (SPI) for controlling and monitoring the device.

In addition, a configurable timeout/window watchdog circuit with reset function, three fail outputs is implemented

and Brown-out Reset function.

The device offers low-power modes to minimize current consumption for connected applications

permanent to battery

Only original, welcome to inquire