Scalable System Basis Chip Family

Product family with various products for complete scalable application

coverage.

Dedicated Data Sheets are available for the different product variants

Complete compatibility (hardware and_software) across the family

TLE9263 with 2 LIN transceivers, 3 voltage regulators

TLE9262 with 1 LIN transceiver, 3 voltage regulators

TLE9261 without LIN transceivers, 3 voltage regulators

TLE9260 without LIN transceivers, 2 voltage regulators

Product variants for 5V (TLE926xQX) and_3.3V (TLE926xQXV33) output voltage for main voltage regulator

CAN Partial Networking variants for 5V (TLE926x-3QX) and_3.3V (TLE926x-3QXV33) output voltage

Device Description

The TLE9263QX is a monolithic integrated circuit in an exposed pad VQFN-48 (7mm x 7mm) power package with

Lead Tip Inspection (LTI) feature to support Automatic Optical Inspection (AOI).

The device is designed for various CAN-LIN automotive applications as main supply for the microcontroller and_as interface for a LIN and_CAN bus network.

To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5V low-dropout voltage regulator (LDO) for eg a microcontroller supply, another 5V low-dropout voltage regulator with

off-board protection for eg sensor supply, another 5V/3.3V regulator to drive an external PNP transistor, which

can be used as an independent supply for off-board usage or in load sharing configuration with the main regulator

VCC1, a HS-CAN transceiver supporting CAN FD and_LIN transceiver for data transmission, high-side switches

with embedded protective functions and_a 16-bit Serial Peripheral Interface (SPI) to control and_monitor the device.

Also implemented are a configurable timeout / window watchdog circuit with a reset feature, three Fail Outputs

and_an under voltage reset feature.

The device offers low-power modes in order to minimize current consumption on applications that are connected

permanently to the battery. A wake-up from the low-power mode is possible via a message on the buses, via the

bi-level sensitive monitoring/wake-up inputs as well as via cyclic wake.

The device is designed to withstand_the severe conditions of automotive applications.