-
2022-09-20 05:00:00
LMC7660 switch capacitor voltage converter
General description
LMC7660 is a CMOS voltage converter that can be used from+1.5V to+10V to the corresponding negative voltage to -1.5V to -10VLMC7660 for the industry for the industry Standard 7660. Features of inverter: running full temperature and voltage range, no external diode, low static current, high power efficiency. LMC7660 uses its built -in oscillator to switch 4 power MOS switches and charging two cheap electrolytic capacitors.
Features
Run the diode without external connectors throughout the temperature and voltage range
low power current, maximum 200 Weian
used to replace 7660 sales of 7660的销
宽工作范围1.5V至10V
97%电压转换效率
95%功率转换效率
易于使用，只有两个外部Component
Extension temperature range
Narrow SO-8 packaging
Power supply voltage 10.5V
(Note 2) – 0.3V to (V ++ 0.3V)
For for for the V+ lt; 5.5V
(V+-5.5V) to (v ++ 0.3V)
For v+ gt; 5.5V
input pin 6 ( Note 2) The current is 20 Wei'an
output short circuit
Duke (v+≤5.5V) continuous
Power consumption (Note 3)
Double -column direct -inserted component 1.4W
Surface installation component 0.6W
TJ maximum value (Note 3) 150 degrees Celsius
θja (Note 3)
] Dual -column direct -inserted component 90 ° C/W
The surface installation component 160 ° C/W
Storage temperature. Temperature range -65 degrees Celsius ≤ T ≤ 150 degrees Celsius
Lead temperature
(welding, 5 seconds) 260 degrees Celsius ESD tolerance (Note 7) ± 2000V
Electric characteristics (Note (Note 4)
Note 1: Absolute maximum rated value indicates the limit that the device may be damaged. During operation, DC and AC electrical specifications that exceed the rated working conditions. See Note 4.
Note 2: Connecting any input terminal to a voltage greater than V+or less than ground may cause destructive closednessLock. It is recommended not to input from the source before the LMC7660 power -on "