STM32F103VCT6 Specifications Parameters

characteristic

• Core: Arm® 32-bit Cortex®-M3 CPU

- 72mhz maximum frequency, 1.25 DMIPS/MHz

(Dhrystone 2.1) performance in 0 wait states

memory access

—Single cycle multiply and hardware

department

?memory

—256 ~ 512k Flash memory

- Up to 64kbytes of SRAM

- Flexible static memory controller, 4 chips

choose. Support Compact Flash, SRAM,

PSRAM, NOR and NAND memory

- LCD parallel interface, 8080/6800 mode

?Clock, reset and supply management

- 2.0 to 3.6 V application power and I/o

- POR, PDR, and programmable voltage detectors

(PVD)

- 4- 16mhz crystal oscillator

- Internal 8 MHz factory cut RC

- Internal 40 kHz RC with calibration

- 32 kHz oscillator RTC with calibration

?Low power

- Hibernate, Stop and Standby modes

- VBAT provides RTC and backup registers

?3 × 12-bit, 1μs A/D converters (up to 21)

aisle)

— Conversion range: 0 ~ 3.6 V

-Three samples and hold ability

--Temperature Sensor

?2 × 12-bit D/A converters

?DMA: 12-channel DMA controller

- Supported peripherals: timer, adc, DAC,

SDIO, I2Ss, spi, i2c and USARTs

?Debug mode

- Serial Wire Debug (SWD) and JTAG interface

- Cortex?- m3 Embedded Trace Macrocell?

?Up to 112 fast I/O ports

- 51/80/112 I/o, all mapped on 16 external

Interrupt carrier and almost all 5v tolerant

?Up to 11 timers

- Up to 4 16-bit timers, up to 4 each

IC/OC/PWM or pulse counter and quadrature

(incremental) encoder input

- 2 x 16-bit motor control PWM timers for dead time generation and emergency stop

- 2 x watchdog timers (independent and windowed)

—SysTick timer: a 24-bit down counter

- 2 × 16-bit basic timer drive DAC

?Up to 13 communication interfaces

- Up to 2 I2C interfaces (SMBus/PMBus)

-Up to 5 USARTs (ISO 7816 interface, LIN, IrDA

capability, modern control)

- Supports up to 3 interfaces (18mbit/s), 2 of which are I2S

multiplexing

- CAN interface (2.0B activated)

- USB 2.0 full speed interface

——SDIO interface

?CRC calculation unit, 96-bit unique ID

?ECOPACK? package

Contact: Mr. Zhang

Tel: 13286652281 (same number on WeChat)

Landline: 0755-82577741

QQ: 872328909

Address: Room 412, Building 1, Huakang Building, Huaqiang North, Futian District, Shenzhen (delivery is available around the market)