-
2022-09-23 17:58:49
GD32F107RCT6
GD32F107RCT6_SSG4920N Introduction
Today I will introduce to you a domestic FET that is suitable for lithium battery protection boards and can replace MOS tubes such as AO3401: NCE3401.
In response to this demand, Xinjie can produce N-channel trench process MOS transistors with small internal resistance and good overcurrent resistance - NCE80H12, the on-resistance of NCE80H12 is less than 6mΩ, the output current can reach 120A, and the motor torque is better , .
GD32F107RCT6_SSG4920N
BYH61010A
BYS31511 BYH32025A BYS32026A BYP32027A BYF32028A BYF32018A BYD32011Z BYF32090 BYJ32056 BYP32011A
However, in terms of structure, there is a big difference between them. In order to better understand the mechanism of power MOSFET, we must first recall the mechanism of low-power FET. . Working principle of power MOS tube Power MOS tube is developed from low-power MOS tube. The following describes the principle of the MOS transistor with the structure of an N-channel enhancement type low-power MOSFET.
BYN41020A BYM41019A BYM41063 BYM429 BYN4286 BYT4222 BYN4224 BYC4213 BYM4225.
NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.
GD32F107RCT6_SSG4920N
AO4922
BYM4610 BYM4640 BYM4875 BYM81080 BYM81095 BYM826 BYM8311 BYM8315 BYH8415 BYM8415.
GD32F207VCT6 GD32F207RCT6 GD32F207RGT6 GD32F207ZGT6 GD32F303RCT6.
GD32F103RBT6 GD32F103RET6 GD32F103VET6 GD32F103VCT6 GD32F103ZET6.
GD32F105RGT6 GD32F105R8T6 GD32F105VET6 GD32F107VGT6 GD32F107ZGT6.
GD32F107RCT6_SSG4920N
The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.
The lithium battery is mainly composed of two blocks, the battery cell and the lithium battery protection board PCM.
relevant information