AP4924M_9945 Introduction

The power mos used on electric vehicles is a three-dimensional structure. The mos tube we have seen is actually composed of thousands of small mos tubes in parallel. You may think that one or a few bad moss should easily appear in thousands of small mos. In fact, it is not that easy. , the current manufacturing process basically guarantees the high consistency of various parameters of these small units. Low-power mos is a planar structure.

The resistance of this current path is called the internal resistance of the MOS tube, that is, the on-resistance. The size of this internal resistance basically determines how much on-current the MOS tube chip can withstand (of course, it is related to other factors, such as thermal resistance). The smaller the internal resistance, the larger the current (because the heat is small).

AP4924M_9945

HAT2029RJ

BYS3105 BYP3105 BYJ31020A BYH31012A BYJ31012A BYP3104 BYF31010A BYP31013A BYS31010A BYH31055 .

There are three parasitic capacitance parameters in the MOS tube specification, namely: input capacitance Ciss, output capacitance Coss, and reverse transfer capacitance Crss. What do the three capacitance parameters represent in the body of the tube? How did it form? .

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.

AP4924M_9945

ME4970A-G

The parasitic capacitance structure of the MOS tube is as follows. Among them, the width of polysilicon, the width of the channel and the trench, the thickness of the G oxide layer, and the doping profile of the PN junction are all factors that affect the parasitic capacitance. .

BYN31028Z BYN31024A BYG31013A BYN31095 BYJ31040 BYM31013A BYH31015-X BYH31015 BYS31030 BYF31040

The structure of the MOSFET shown in the figure is not suitable for use in high-power applications for two reasons. On the one hand, the three electrodes of the low-power MOSFET are on one plane, the channel cannot be made very short, and the channel resistance is large. On the other hand, the conductive channel is composed of surface induced charges, and the channel current is the surface current. To increase the current capacity, it is necessary to increase the chip area. Such a structure is unlikely to achieve a large current. .

Another technique is to intermittently improve the structure of the MOSFET and use a straight V-groove structure. In order to avoid the problems of too small current-carrying capacity and large on-resistance of MOSFET, two techniques are generally used in high-power MOSFETs. One is to connect millions of low-power MOSFET unit cells in parallel to improve the current-carrying capacity of MOSFET. . FIG. 3 is a cross-sectional view of the structure of a V-channel MOSFET.

AP4924M_9945

The performance parameters of NCE3401 are still good, suitable for load switching or pulse width modulation applications, and the impedance value is relatively low, and the new clean energy MOS tube has the characteristic process technology of shielded gate power and super junction power MOSFET. The parameter performance and sample delivery performance can be almost the same as foreign MOS tubes, such as the same used in lithium battery protection boards, NCE3401, AO3401, IRLML5203TR, DMP3098L-7, I think the functions can be satisfied in comparison, and the price is moderate NCE3401 is more suitable.

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

relevant information