ISL55001 is a single -piece operation amplifier of high -speed, low power consumption, low -cost. ISL55001 is a stable unit gain, with a 300V/microsecond conversion rate and 220MHz bandwidth, only 9mA power supply is currently. The power supply range of ISL55001 is from ± 15V to ± 2.5V. For single power operation, the operating voltage of ISL55001 drops from 30V to 5V. ISL55001 also has a very wide output voltage swing-12.75V/+13.4V, VS ± 15V and RL 1kΩ. When the gain is +1, the -3DB bandwidth of ISL55001 is 220MHz, and the phase margin is 50 °. Because of its traditional voltage feedback topology, ISL55001 allows its feedback network. This multifunctional and low -cost and 140mA output current drivers make ISL55001 an ideal choice for price -sensitive applications requires low power and high speed. ISL55001 provides 8 LD SO packaging, and stipulates that it runs at a temperature range at a temperature of -40 ° C to+85 ° C

Note:

1. See TB347 for the volume specifications.

2. These Intersil lead -free plastic packaging products use special lead -free materials kit, mold/mold additional material, 100%matte tin plating board annexation (E3 is terminated, compliance with ROHS standards, SNPB and no without SNPB and no without SNPB and no without SNPB and no without SNPB and no without SNPB and no without SNPB and no without SNPB and no without SNPB and no without SNPB. Lead welding compatibility operation). Lead-free products in INTERSIL belong to MSL categories that reaches or exceeded the IPC/JEDEC J standard in the lead-free peak return welding temperature-020.

3. For humidity sensitivity level (MSL), see the information page of the device ISL55001. For details, please refer to Techbrief TB363.

Features

220MHz-3DB bandwidth

The unit gain stable

Low power supply current: 9ma@vs ? 5V

Wide power range:? 2.5V to? 5V dual power supply and 5V to 30V single power supply

High conversion rate: 300V/microsecond

fast settlement: 10V step 75ns to 0.1%

Wide output voltage fluctuation: -12.75V/+13.6V

vs ± 5V, RL 1kΩ

EL2044

The low -cost enhancement alternative Lead (lead (lead (lead (lead (leader Compliance with ROHS)

Application

Video amplifier

Single power amplifier

Device

High -speed sampling and maintenance

High -speed signal processing

ADC/DAC buffer

pulse/radio frequency amplifier

PIN diode receiving reception

Delivery amplifier

Optoelectronics double -added large device

Differential amplifier

Absolute maximum rated value (TA +25 ° C) thermal information

Power voltage (VS). ± 16.5V or 33V

input voltage (vehicle identification number). ± and

Differential input voltage (dvin). ± 0 volts

Static discharge rated value

Human model. 3 kV

Machine model. 250 volts

Continuous output current. 60 mia

Power consumption (PD). See the curve

Work temperature range (TA). -40 ° C to+85 ° C

The working knot temperature (TJ). +150 degrees Celsius

Storage temperature (TST). -65 ° C to+150 ° C

Lead -free return curve.

Note: Do not run for a long time under the maximum rated value listed. Under this condition, it may cause adversely affecting product reliability and failure that causes failure within the scope of warranty

DC electrical specification vs ± 15V, RL 1kΩ, TA +25 ° C, unless there is another other Regulation.

Note:

4. Measure from TMIN to TMAX.

AC electrical specifications SVS ± 15V, AV +1, RL 1kΩ, unless there are other regulations. (Continued)

Note:

5. Rotation rate is measured by rising edge.

6. For vs ? 5V, VOUT 10VP-P, for vs ± 5V, vout 5VP-P. The full power bandwidth is based on the use of FPBW SR/(2π*VPEAK).

No. 7. The video performance measured when VS ± 15V, AV +2, the video level measured on RL is twice the normal level 150Ω. This is with the standard video level under the 75Ω load. For other values or RL, see the typical performance curve " on page 4 above.

Product description

ISL55001It is a broadband