-
2022-09-21 17:24:28
ISL59910, ISL59913 three differential receiver, equalizer
ISL59910 and ISL59913 are the three -channel differential receiver and balancer. They all have three high -speed and five programming pole differential receivers. This then adds these extremely block outputs to an output buffer. The equilibrium length is set to a single needle. ISL59910 and ISL59913 output can also enter high impedance state, so that multiple devices are connected in parallel to multi -way reuse applications. The gain of each channel can adjust the 6DB to use its VGAIN control signal. In addition, the gain of 6 decibels can be switched to the cable to provide matching drivers. The bandwidth of ISL59910 and ISL59913 consumes only 108mA on the ± 5V power supply. The single input voltage is used to set the required cable length. ISL59910 is a special version of the special version of ISL59913 to synchronize the synchronization of three common modes EL4543 . (For details of EL4543, please refer to the data table.) ISL59910 and ISL59913 provide 28 LD QFN packaging and regulations at -40 ° C to+85 ° C temperature range.
Features
150MHz-3DB bandwidth
Category 5 compensation -100 MM@ 600 feet- 300 feet is 135MHz
108mA power supply current
Differential input range 3.2V
Common model input range -4V to+3.5V
± 5V power supply
] Export to the power supply within 1.5V
Provide 28 LD QFN packaging
Provide lead -free and annealing (in line with ROHS)
Application
twisted line receiving /Equalist
KVM (keyboard/video/mouse)
VGA
Security video
[ 123] Absolutely maximum rated value (TA +25 ° C) runs
The power supply voltage between VS+and VS-. 12 volts
The maximum continuous output current of each channel. 30 mia
Power consumption. See the curve
pin voltage. VS-0.5V to vs ++ 0.5V
Storage temperature. -65 ° C to+150 ° C
Environmental operating temperature. -40 ° C to+85 ° C
The mold connection temperature. +150 degrees Celsius
Note: The stress listed in the absolute maximum rated value " may be setPrepare permanent damage. This is a stress level and the above conditions described in the operation chapter of this specification or the device under any other conditions.
Important Tips: Ensure all parameters with the smallest/maximum specifications. The type value is for reference only. Unless there is another instructions