BYF36519A_AP6901GSM-HF Guide

Today I will introduce to you a domestic FET that is suitable for lithium battery protection boards and can replace MOS tubes such as AO3401: NCE3401.

Assuming that the carriers of the conductive channel are electrons, it is called an N-channel; assuming that the carriers are holes, it is called a P-channel. According to the carrier of the conduction channel, it can be divided into N channel and P channel. A MOS tube is a semiconductor device in which unipolar carriers participate in conduction.

BYF36519A_AP6901GSM-HF

FDS6930A-NL

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

Barrier capacitance: In power semiconductors, when the N-type and P-type semiconductors are combined, the electrons of the N-type semiconductor will partially diffuse into the holes of the P-type semiconductor due to the concentration difference, so they will form on both sides of the junction surface. Space charge area (the electric field formed by the space charge area will resist the diffusion movement, and finally make the diffusion movement reach equilibrium);

BYN41020A BYM41019A BYM41063 BYM429 BYN4286 BYT4222 BYN4224 BYC4213 BYM4225.

BYS3105 BYP3105 BYJ31020A BYH31012A BYJ31012A BYP3104 BYF31010A BYP31013A BYS31010A BYH31055 .

BYF36519A_AP6901GSM-HF

AP4232BGM

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

BYM8615 BYH8638 BYN8610A BYM8628 BYN8222 BYM31020 BYS31010 BYJ3104 BYH3105 BYP3109.

When the low UDS separate pinch off voltage is large, the MOS tube is equivalent to a resistance, and this resistance decreases with the increase of UGS. Cut-off area (UGS). Growth slows as the conduction channel approaches pinch off. Figure 1. Drain output characteristics of MOS transistors The output characteristics of field effect transistors can be divided into four regions: variable resistance region, cut-off region, breakdown region and constant current region. Variable resistance region (UDS In this region, ID increases linearly as UDS increases.

When the UDS increases to a certain value, the drain PN junction breaks down, the leakage current increases rapidly, and the curve turns upward and enters the breakdown region. Power MOSFETs are used in power conversions such as switching power supplies and inverters, and they work in two regions, the cut-off region and the breakdown region. . The full area (UDS>UGS-UT) guarded in the above three areas is the full area, also known as the constant current area or the amplification area. The breakdown region is in the region of considerable drain-source voltage UDS, and the drain current is approximately constant.

BYF36519A_AP6901GSM-HF

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

The lithium battery of electric vehicles can work normally, largely thanks to the lithium battery protection board.

relevant information