BYS36521Z_FDS6900S-NL Introduction

The above is the specification of the power mos tube NCE80H12. The power mos tube NCE80H12 used in our electric vehicle controller is actually different from the low-power mos structure in the usual cmos integrated circuit.

The core of power semiconductors is the PN junction. From diodes, triodes to field effect transistors, various applications are made according to the characteristics of the PN junction. Field effect transistors are divided into junction type and insulated gate type, among which the insulated gate type is also called MOS tube (Metal Oxide Semiconductor). According to whether the inversion layer exists in the case of no electricity, MOS tubes can be divided into enhancement type and depletion type.

BYS36521Z_FDS6900S-NL

BYH31015-X

BYS31511 BYH32025A BYS32026A BYP32027A BYF32028A BYF32018A BYD32011Z BYF32090 BYJ32056 BYP32011A

Barrier capacitance: In power semiconductors, when the N-type and P-type semiconductors are combined, the electrons of the N-type semiconductor will partially diffuse into the holes of the P-type semiconductor due to the concentration difference, so they will form on both sides of the junction surface. Space charge area (the electric field formed by the space charge area will resist the diffusion movement, and finally make the diffusion movement reach equilibrium);

NCE30H11K NCE3402B NCE30H10AK NCE2304 NCE3404.

However, in terms of structure, there is a big difference between them. In order to better understand the mechanism of power MOSFET, we must first recall the mechanism of low-power FET. . The following describes the principle of the MOS transistor with the structure of an N-channel enhancement type low-power MOSFET. Working principle of power MOS tube Power MOS tube is developed from low-power MOS tube.

BYS36521Z_FDS6900S-NL

STM6915

. The characteristics of a MOSFET can be characterized by a transfer characteristic curve and a drain output characteristic curve. Figure 3 shows the handling characteristics of a certain FET. The transfer characteristic refers to the relationship curve between the gate voltage UGS and the corresponding drain current ID when the voltage UDS between the drain and the source is at a certain fixed value.

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

When the UDS increases to a certain value, the drain PN junction breaks down, the leakage current increases rapidly, and the curve turns upward and enters the breakdown region. Power MOSFETs are used in power conversions such as switching power supplies and inverters, and they work in two regions, the cut-off region and the breakdown region. . The full area (UDS>UGS-UT) guarded in the above three areas is the full area, also known as the constant current area or the amplification area. The breakdown region is in the region of considerable drain-source voltage UDS, and the drain current is approximately constant.

NCE3008M NCE3010S NCE3011E NCE30D0808J NCE3018AS.

BYS36521Z_FDS6900S-NL

The lithium battery of electric vehicles can work normally, largely thanks to the lithium battery protection board.

NCE25TD135LP NCE1608N NCE18ND11U NCE3134 NCE20ND07U.

relevant information