BYF366_TSM4416DCS RLG Guide

In simple terms, the motor is driven by the output current of the MOS tube such as NCE80H12. The larger the output current (in order to prevent overcurrent from burning the MOS tube, the controller has limited current protection), the motor torque is strong and the acceleration is powerful, so MOS Tubes play a very important role in electric vehicle controllers.

The MOS tube is a voltage-driven device. As long as an appropriate voltage is applied between the gate G and the source S, the conduction path between the source S and D will be formed. As the switch tube of the driving part, the main focus of the MOS tube is the withstand voltage, current withstand value and switching speed.

BYF366_TSM4416DCS RLG

BYN4458

Barrier capacitance: In power semiconductors, when the N-type and P-type semiconductors are combined, the electrons of the N-type semiconductor will partially diffuse into the holes of the P-type semiconductor due to the concentration difference, so they will form on both sides of the junction surface. Space charge area (the electric field formed by the space charge area will resist the diffusion movement, and finally make the diffusion movement reach equilibrium);

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. . For these two enhanced MOS tubes, NMOS is more commonly used.

BYP31538 BYP31510 BYP31575 BYH31574 BYD31523A BYH31532 BYM31580 BYH31519 BYS31535 BYM31545 .

The reason is that the on-resistance is small and it is easy to manufacture. Therefore, in the application of switching power supply and motor drive, NMOS is generally used.

BYF366_TSM4416DCS RLG

5836N

BYN31028Z BYN31024A BYG31013A BYN31095 BYJ31040 BYM31013A BYH31015-X BYH31015 BYS31030 BYF31040

The structure of the MOSFET shown in the figure is not suitable for use in high-power applications for two reasons. On the one hand, the three electrodes of the low-power MOSFET are on one plane, the channel cannot be made very short, and the channel resistance is large. On the other hand, the conductive channel is composed of surface induced charges, and the channel current is the surface current. To increase the current capacity, it is necessary to increase the chip area. Such a structure is unlikely to achieve a large current. .

BYM4610 BYM4640 BYM4875 BYM81080 BYM81095 BYM826 BYM8311 BYM8315 BYH8415 BYM8415.

The parasitic capacitance structure of the MOS tube is as follows. Among them, the width of polysilicon, the width of the channel and the trench, the thickness of the G oxide layer, and the doping profile of the PN junction are all factors that affect the parasitic capacitance. .

BYF366_TSM4416DCS RLG

NCE25TD135LT NCE15TD135LT NCE15TD120LP NCE15TD135LP NCE25TD120LP.

NCE25TD135LP NCE1608N NCE18ND11U NCE3134 NCE20ND07U.

relevant information