-
2022-09-21 17:24:28
ISL59830 real single power video drive
ISL59830 is a revolutionary device that allows the real single power operation of the video amplifier. The device runs a single 3.3V power supply and generates the internal voltage of the negative electrode. This makes DC accurate coupling on the 75Ω dual -end lines to play videos. Because the buffer has an integrated 6DB gain, it is necessary to set the resistor without external gain. Entering the reference voltage can be provided to the reference voltage (usually 0.6V) to migrate the analog video level (usually 0.6V).
Note: lead -free+annealing product using special lead -free materials group; mold/mold connection material and 100 %matte tin plating board The final decoration is compatible with the ROHS standard and the SNPB and lead -free welding operations. Lead-leading products are classified as MSL at the time of lead-free peak return welding to the temperature IPC/JEDEC J standard -020 that MSL meets or exceeds the lead-free requirements.
Features
Mie single power buffer
Single power supply+3.3V power supply
No need to output DC closed lock capacitors
2 Output buffer The fixed gain of the device
Output three stability
Enable/disable function
50MHz 0.1DB bandwidth
200MHz-3DB bandwidth
Provide lead -free plus annealing (in line with ROHS)
Application
Driving video
VCC, VS and GND power supply voltage. 5 volts
Vehicle identification number, VREF. VCC+0.3V, V-0.3V
Voltage between vehicle identification number and vehicle reference voltage. ± 2 volts
Maximum continuous output current. 30 mia
Work temperature. -40 ° C to+85 ° C
The maximum temperature of the mold. +150 degrees Celsius
Storage temperature. -65 ° C to+150 ° C
Lead temperature. 260 degrees Celsius
Power consumption. See the curve
Note: The stress listed in the absolute maximum rated value " may cause permanent damage to the device. This is a stress level and the above conditions described in the operation chapter of this specification or the device under any other conditions.
Important Tips: Ensure all parameters with the smallest/maximum specifications. Typical values are for reference only. Unless otherwise explained