BYP3611_SI6880EDQ Introduction

When naming the company, the founders incorporated their nostalgia for the past and expectations for the future. A simple name with many untold stories behind it... . There are many well-known brands in the electronics industry, each brand is like a person's name, and its origin and naming have its own unique style. Their success today is due to the founders.

The MOS tube is a voltage-driven device. As long as an appropriate voltage is applied between the gate G and the source S, the conduction path between the source S and D will be formed. As the switch tube of the driving part, the main focus of the MOS tube is the withstand voltage, current withstand value and switching speed.

BYP3611_SI6880EDQ

FDS6894A-NL

MOS tube 3306 product features 1. RDS(on)=7mΩ@VGS=10V 2. Lead-free green equipment 3. Low resistance switch to reduce conduction loss 4. High avalanche current.

BYS31511 BYH32025A BYS32026A BYP32027A BYF32028A BYF32018A BYD32011Z BYF32090 BYJ32056 BYP32011A

The reason is that the on-resistance is small and it is easy to manufacture. Therefore, in the application of switching power supply and motor drive, NMOS is generally used.

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

BYP3611_SI6880EDQ

HAT2114RJ

When the low UDS separate pinch off voltage is large, the MOS tube is equivalent to a resistance, and this resistance decreases with the increase of UGS. Cut-off area (UGS). Growth slows as the conduction channel approaches pinch off. Figure 1. Drain output characteristics of MOS transistors The output characteristics of field effect transistors can be divided into four regions: variable resistance region, cut-off region, breakdown region and constant current region. Variable resistance region (UDS In this region, ID increases linearly as UDS increases.

When the UDS increases to a certain value, the drain PN junction breaks down, the leakage current increases rapidly, and the curve turns upward and enters the breakdown region. Power MOSFETs are used in power conversions such as switching power supplies and inverters, and they work in two regions, the cut-off region and the breakdown region. . The full area (UDS>UGS-UT) guarded in the above three areas is the full area, also known as the constant current area or the amplification area. The breakdown region is in the region of considerable drain-source voltage UDS, and the drain current is approximately constant.

For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself. .

Another technique is to intermittently improve the structure of the MOSFET and use a straight V-groove structure. In order to avoid the problems of too small current-carrying capacity and large on-resistance of MOSFET, two techniques are generally used in high-power MOSFETs. One is to connect millions of low-power MOSFET unit cells in parallel to improve the current-carrying capacity of MOSFET. . FIG. 3 is a cross-sectional view of the structure of a V-channel MOSFET.

BYP3611_SI6880EDQ

NCE25TD135LT NCE15TD135LT NCE15TD120LP NCE15TD135LP NCE25TD120LP.

The lithium battery is mainly composed of two blocks, the battery cell and the lithium battery protection board PCM.

relevant information