BYS3623_FDW2601NZ Introduction

MOS tubes like NCE80H12 convert the DC power in the battery into AC power when the electric vehicle is running normally, thereby driving the motor to run.

In response to this demand, Xinjie can produce N-channel trench process MOS transistors with small internal resistance and good overcurrent resistance - NCE80H12, the on-resistance of NCE80H12 is less than 6mΩ, the output current can reach 120A, and the motor torque is better , .

BYS3623_FDW2601NZ

BYJ36570A

Power MOSFETs are generally rarely used in P-channel. Since the mobility of holes is lower than that of electrons, the on-resistance of P-channel transistors is larger than that of N-channel transistors for the same channel size. . According to the two points of the conductive channel and the process of channel formation, MOS tubes can be divided into: P-channel enhancement MOS tubes, P-channel depletion MOS tubes, N-channel enhancement MOS tubes and N-channel depletion MOS tubes . Figure four types of MOSFETs and their graphical symbols.

BYC4322 BYM4310 BYM4322 BYM4316 BYC4312 BYM438 BYS441 BYN4458 BYE4625Z BYM4612 .

BYS3105 BYP3105 BYJ31020A BYH31012A BYJ31012A BYP3104 BYF31010A BYP31013A BYS31010A BYH31055 .

. The conductive channel of the MOS tube can be formed during the production process or by turning on an external power supply. When the gate voltage is equal to zero, there is a channel (that is, formed during production), which is called depletion mode. When an external voltage is applied The one that forms the channel later is called the enhancement type.

BYS3623_FDW2601NZ

AM4966N

When the low UDS separate pinch off voltage is large, the MOS tube is equivalent to a resistance, and this resistance decreases with the increase of UGS. Cut-off area (UGS). Growth slows as the conduction channel approaches pinch off. Figure 1. Drain output characteristics of MOS transistors The output characteristics of field effect transistors can be divided into four regions: variable resistance region, cut-off region, breakdown region and constant current region. Variable resistance region (UDS In this region, ID increases linearly as UDS increases.

When the UDS increases to a certain value, the drain PN junction breaks down, the leakage current increases rapidly, and the curve turns upward and enters the breakdown region. Power MOSFETs are used in power conversions such as switching power supplies and inverters, and they work in two regions, the cut-off region and the breakdown region. . The full area (UDS>UGS-UT) guarded in the above three areas is the full area, also known as the constant current area or the amplification area. The breakdown region is in the region of considerable drain-source voltage UDS, and the drain current is approximately constant.

Another technique is to intermittently improve the structure of the MOSFET and use a straight V-groove structure. In order to avoid the problems of too small current-carrying capacity and large on-resistance of MOSFET, two techniques are generally used in high-power MOSFETs. One is to connect millions of low-power MOSFET unit cells in parallel to improve the current-carrying capacity of MOSFET. . FIG. 3 is a cross-sectional view of the structure of a V-channel MOSFET.

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

BYS3623_FDW2601NZ

NCE8205B NCE8205 NCE8205i NCE8205E NCE9926.

The performance parameters of NCE3401 are still good, suitable for load switching or pulse width modulation applications, and the impedance value is relatively low, and the new clean energy MOS tube has the characteristic process technology of shielded gate power and super junction power MOSFET. The parameter performance and sample delivery performance can be almost the same as foreign MOS tubes, such as the same used in lithium battery protection boards, NCE3401, AO3401, IRLML5203TR, DMP3098L-7, I think the functions can be satisfied in comparison, and the price is moderate NCE3401 is more suitable.

relevant information