BYT337_SI4974DY-T1-E3 Introduction

When naming the company, the founders incorporated their nostalgia for the past and expectations for the future. A simple name with many untold stories behind it... . There are many well-known brands in the electronics industry, each brand is like a person's name, and its origin and naming have its own unique style. Their success today is due to the founders.

The power mos used on electric vehicles is a three-dimensional structure. The mos tube we have seen is actually composed of thousands of small mos tubes in parallel. You may think that one or a few bad moss should easily appear in thousands of small mos. In fact, it is not that easy. , the current manufacturing process basically guarantees the high consistency of various parameters of these small units. Low-power mos is a planar structure.

BYT337_SI4974DY-T1-E3

BYN3630

NCE3404Y NCE3400A NCE3400 NCE30ND07AS NCE3008N.

NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.

. The conductive channel of the MOS tube can be formed during the production process or by turning on an external power supply. When the gate voltage is equal to zero, there is a channel (that is, formed during production), which is called depletion mode. When an external voltage is applied The one that forms the channel later is called the enhancement type.

As for why not to use depletion-type MOS tubes, it is not recommended to get to the bottom of it. . For these two enhanced MOS tubes, NMOS is more commonly used.

BYT337_SI4974DY-T1-E3

HAT2256R

The N-channel enhancement mode MOS transistor uses a low-doped P-type semiconductor as the substrate, and forms two heavily doped N+ regions on the substrate by a dispersed method, and then generates a very thin one on the P-type semiconductor. A silicon dioxide insulating layer, and then photolithography is used to etch away the silicon dioxide layer on the upper end of the two heavily doped N+ regions, exposing the N+ regions, and finally on the outer surface of the two N+ regions and the two between them. The surface of silicon oxide is sprayed with a layer of metal film by evaporation or sputtering. These three metal films constitute the three electrodes of the MOS tube, which are called source (S), gate (G) and drain (D) respectively. .

The parasitic capacitance structure of the MOS tube is as follows. Among them, the width of polysilicon, the width of the channel and the trench, the thickness of the G oxide layer, and the doping profile of the PN junction are all factors that affect the parasitic capacitance. .

BYM4610 BYM4640 BYM4875 BYM81080 BYM81095 BYM826 BYM8311 BYM8315 BYH8415 BYM8415.

For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself. .

BYT337_SI4974DY-T1-E3

MOS tube NCE3401 is a -30V drain-source voltage, 4.2A current, P-channel MOS tube in SOT-23 package. .

The lithium battery of electric vehicles can work normally, largely thanks to the lithium battery protection board.

relevant information