ISL5927 dual 14 -...

  • 2022-09-21 17:24:28

ISL5927 dual 14 -bit,+3.3V, 260+MSPS, high -speed D/A converter

ISL5927 is a double 14 -bit, 260+MSPS (sample sample per second), CMOS, high speed, low power consumption, D/A (digital to simulation) converter, specifically designed for high -performance communication systems, such as Base, such as Base Use a 2.5G or 3G honeycomb protocol.

Feature

Low power. 233 MW, 130 millisecond output 20 mAh per second

A adjustable output current. 2MA to 20mA

Guarantee gain matching lt; 0.14db

+3.3V power supply

3V LVCMOS compatible input

Excellent and unwilling dynamic range ( 75DBC to Narquist, fs 130MSPS, FOUT 10MHz)

19.2 MMS, UMTS adjacent channel power 71 decibels

Edge/gsm sfdr 94dbc, 11MHz, 20MHz window window

Dual power supply, 3.3V,

AD9767

low power alternative Application

Honeycomb infrastructure-single-load or multi-carrier wave: IS- 136, IS-95, GSM, EDGE, CDMA2000, WCDMA, TDS-CDMA

BWA Infrastructure

orthodontic transmission of 0-80MHz

Medical/ Medical/ Test instruments and equipment

Wireless communication system

Absolutely maximum rated heat information

Digital numbers Power voltage DVDD to DGND. +3.6 volts

Analog power supply voltage AVDD to AGND. +3.6 volts

ground, agng to dgnd. -0.3V to+0.3V

Digital input voltage (data, clock, sleep). DVD+0.3V

Reference input voltage range. Average voltage+0.3V

Simulation output current (iOUT). 24 mia

Operation conditions

The temperature range. -40 ° C to 85 ° C

Thermal resistance (typical, Note 1) θJa (degrees Celsius/tile)

LQFP package. 70

The highest knot temperature. 150 degrees Celsius

The highest storage temperature range. -65 ° C to 150 ° C

The highest lead temperature (welding 10s)Essence 300 degrees Celsius

Note: The stress listed in the absolute maximum rated value " may cause permanent damage to the device. This is a stress level and the above conditions described in the operation chapter of this specification or the device under any other conditions.

Note:

1.θja is the measurement

electrical specification avdd dvdd +3.3V