BYM333_SI4804BDY-T1-E3 Introduction

Xinjie, behind this FET NCE80H12, utilizes its own technical advantages to work closely with 8-inch wafer foundries, packaging and testing foundries, and has a complete quality management system to ensure continuous product quality and stable supply.

So the stability of the tube is inseparable from the manufacturing process, and poor workmanship may result in the inconsistency of the parameters of these small tubes. Their various switching actions are almost the same. Of course, when they burn out, there must be a small tube that can't bear it first.

BYM333_SI4804BDY-T1-E3

BYS364

NCE3019AS NCE3045G NCE3400AY NCE30ND07S NCE8601B.

There are three parasitic capacitance parameters in the MOS tube specification, namely: input capacitance Ciss, output capacitance Coss, and reverse transfer capacitance Crss. What do the three capacitance parameters represent in the body of the tube? How did it form? .

. The conductive channel of the MOS tube can be formed during the production process or by turning on an external power supply. When the gate voltage is equal to zero, there is a channel (that is, formed during production), which is called depletion mode. When an external voltage is applied The one that forms the channel later is called the enhancement type.

BYC4322 BYM4310 BYM4322 BYM4316 BYC4312 BYM438 BYS441 BYN4458 BYE4625Z BYM4612 .

BYM333_SI4804BDY-T1-E3

SI4814BDY-T1-E3

NCE3075Q NCE3015S NCE3400E NCE3065K NCE3095AK.

When the low UDS separate pinch off voltage is large, the MOS tube is equivalent to a resistance, and this resistance decreases with the increase of UGS. Cut-off area (UGS). Growth slows as the conduction channel approaches pinch off. Figure 1. Drain output characteristics of MOS transistors The output characteristics of field effect transistors can be divided into four regions: variable resistance region, cut-off region, breakdown region and constant current region. Variable resistance region (UDS In this region, ID increases linearly as UDS increases.

For example, electronic fuel injection system, anti-lock brake control, anti-skid control, traction control, electronically controlled suspension, electronically controlled automatic transmission, electronic power steering, etc. The electronic device that can be used independently in the environment has no direct relationship with the performance of the car itself. .

. The characteristics of a MOSFET can be characterized by a transfer characteristic curve and a drain output characteristic curve. Figure 3 shows the handling characteristics of a certain FET. The transfer characteristic refers to the relationship curve between the gate voltage UGS and the corresponding drain current ID when the voltage UDS between the drain and the source is at a certain fixed value.

BYM333_SI4804BDY-T1-E3

The functions of the MOS tube in the protection board are: 1. Detect overcharge, 2. Detect over-discharge, 3. Detect over-current during charging, 4. Detect over-current during discharge, 5. Detect over-current during short circuit.

NCE8205B NCE8205 NCE8205i NCE8205E NCE9926.

relevant information